One cubic yard of concrete covers 81 square feet at 4 inches deep. At 3 inches deep it covers 108 square feet, and at 6 inches deep it covers 54 square feet. The rule is simple: coverage equals 27 divided by the depth in feet.
Coverage is the question to ask when you know your area but not your volume. You have a patio to pour, you know it is 300 square feet, and you want to know how many cubic yards to order — the coverage table answers that in one step. A free cubic yards calculator checks the table against your exact measurements, but the table below lets you estimate any job in seconds.
How Much Area Does One Cubic Yard Cover?
One cubic yard is 27 cubic feet. Spread it at a given depth, and the area it covers is 27 divided by the depth in feet:
| Depth | Depth in feet | Area covered by 1 cubic yard |
|---|---|---|
| 2 inches | 0.17 feet | 162 square feet |
| 3 inches | 0.25 feet | 108 square feet |
| 4 inches | 0.33 feet | 81 square feet |
| 5 inches | 0.42 feet | 65 square feet |
| 6 inches | 0.50 feet | 54 square feet |
| 8 inches | 0.67 feet | 41 square feet |
| 12 inches | 1.00 foot | 27 square feet |
The pattern is worth memorising: 81 square feet at 4 inches is the figure you will use most, because 4 inches is the standard slab depth. Double the depth to 8 inches and the coverage halves to 41 square feet. Halve the depth to 2 inches and it doubles to 162. Depth and coverage are inversely proportional — every inch of depth costs you coverage.
For the same reason, the coverage question and the volume question are two sides of one calculation. Our guide to how to calculate cubic yards works from length × width × depth; this guide works backwards from area and depth to the same answer.
Worked Example 1: A 10 ft × 10 ft Slab, 3 Inches Deep
The lead example from this cluster, worked through the coverage way:
- Area: 10 × 10 = 100 square feet.
- Coverage at 3 inches: one cubic yard covers 108 square feet.
- Cubic yards needed: 100 ÷ 108 = 0.93 cubic yards.
- Order: round up to 1 cubic yard.
Check it against the volume method: 10 × 10 × 0.25 = 25 cubic feet, and 25 ÷ 27 = 0.93 cubic yards. Both routes give the same answer, as they must — coverage is just the volume calculation rearranged. If the two methods ever disagree, one of them has a measurement error in it.
Worked Example 2: A 300 Square Foot Patio, 4 Inches Deep
A typical backyard patio:
- Coverage at 4 inches: one cubic yard covers 81 square feet.
- Cubic yards needed: 300 ÷ 81 = 3.70 cubic yards.
- Waste allowance: 3.70 × 1.10 = 4.07 cubic yards.
- Order: 4.5 cubic yards.
This is the same 3.70 cubic yards as the 20 × 15 patio in our slab guide — because 20 × 15 is 300 square feet. The area method is faster when you already know the square footage from a plan or a quote, and the volume method is faster when you have the length and width in front of you.
Worked Example 3: A 12 ft × 40 ft Driveway, 4 Inches Deep
Driveways show why depth dominates the order:
- Area: 12 × 40 = 480 square feet.
- Coverage at 4 inches: one cubic yard covers 81 square feet.
- Cubic yards needed: 480 ÷ 81 = 5.93 cubic yards.
- Waste allowance: 5.93 × 1.10 = 6.52 cubic yards.
- Order: 6.5 cubic yards.
Now pour the same driveway at 6 inches, as a driveway carrying cars should be:
- Coverage at 6 inches: one cubic yard covers 54 square feet.
- Cubic yards needed: 480 ÷ 54 = 8.89 cubic yards.
- Waste allowance: 8.89 × 1.10 = 9.78 cubic yards.
- Order: 10 cubic yards.
Two extra inches of depth add 3.5 cubic yards — more than half as much concrete again. When a contractor quotes a driveway, always ask what depth the quote assumes: a 4-inch quote and a 6-inch quote differ by thousands of dollars on a job this size, and the cheaper quote is not a bargain if the slab cracks under a car. Our slab guide has the full breakdown of how many cubic yards of concrete a slab needs by size and depth.
How to Work Out Coverage for Your Project
Use this three-step method for any area:
Step 1: Find the area in square feet
For a rectangle, multiply length × width. For a circle, use π × radius² — a round patio 10 feet across has an area of 3.1416 × 5² = 78.54 square feet. For an L-shape, split it into two rectangles and add them: a 12 × 10 section plus a 6 × 8 section is 120 + 48 = 168 square feet.
Step 2: Divide by the coverage for your depth
Take the area and divide it by the coverage figure from the table for your depth. At 4 inches, divide by 81. At 3 inches, divide by 108. At 6 inches, divide by 54. A free cubic yard calculator does this division for any depth, including depths not in the table.
Step 3: Add 10% and round up
Multiply by 1.10 for waste, then round up to the nearest half cubic yard. This is the number you give the supplier.
A shortcut for the most common case: at 4 inches deep, divide your square footage by 81. A 162 square foot patio needs exactly 2 cubic yards; a 405 square foot patio needs exactly 5. Most patios fall between those two numbers.
Coverage for Other Materials
The same 27-cubic-feet rule covers soil, mulch, and gravel — only the depth changes:
- Topsoil for a lawn: spread 3–4 inches deep, one cubic yard covers 81–108 square feet. A 1,000 square foot lawn top-dressed at 3 inches needs 1,000 ÷ 108 = 9.26 cubic yards — order 10.
- Mulch for beds: spread 2–3 inches deep, one cubic yard covers 108–162 square feet. A 10 × 10 foot bed mulched 3 inches deep is 100 square feet, needing 100 ÷ 108 = 0.93 cubic yards — order 1.
- Gravel for a path: spread 2–3 inches deep over landscape fabric, one cubic yard covers 108–162 square feet.
- Garden soil for a raised bed: filled 12 inches deep, one cubic yard covers 27 square feet. An 8 × 4 foot bed (32 square feet) needs 32 ÷ 27 = 1.19 cubic yards — order 1.25.
Note that bulk soil and mulch settle and compact after delivery, so the 10% allowance matters even more for landscaping than for concrete — and for a garden bed, our guide to calculating cubic yards for a garden bed covers soil depth and bag counts in detail.
What Affects Real Coverage?
The table assumes a perfectly flat area and an exact depth. Real jobs are messier:
- Uneven ground. A slab poured over ground that dips by half an inch in places needs more concrete than the table says — the low spots fill first. This is the main reason for the 10% allowance.
- Spillage and washout. Some concrete stays in the wheelbarrow, the chute, and the mixer. On a small job this can be 5% of the order on its own.
- Compaction. Soil and gravel compact under their own weight and underfoot, so a bed filled to the brim settles below the rim within days. Order the allowance, and top up later if needed.
None of these change the table — they are what the 10% waste allowance is for. Add it, round up, and the coverage figure stays honest.
Common Mistakes About Concrete Coverage
- Using square feet as cubic yards. Area and volume are different things. A 100 square foot slab is not 100 cubic yards, or 100 cubic feet — at 3 inches deep it is 25 cubic feet, or 0.93 cubic yards.
- Forgetting depth entirely. “One cubic yard covers 81 square feet” is only true at 4 inches. At 6 inches it covers 54; at 2 inches, 162. Always state the depth with the coverage figure.
- Ordering the exact figure. The table gives the theoretical minimum. Order the minimum and you will run short — always add 10% and round up.
- Measuring the area wrong. The most common measurement error is measuring the outside of the forms instead of the inside, or including an area that will not be poured. Measure the area that will actually hold concrete.
Frequently Asked Questions
How much does one cubic yard of concrete cover?
One cubic yard covers 81 square feet at 4 inches deep, 108 square feet at 3 inches deep, and 54 square feet at 6 inches deep. Coverage is 27 divided by the depth in feet.
How many cubic yards do I need for a 300 square foot patio?
At 4 inches deep, divide 300 by 81 to get 3.70 cubic yards. With a 10% waste allowance that is 4.07, so order 4.5 cubic yards.
How many square feet does a cubic yard cover at 6 inches?
54 square feet. The deeper the pour, the less area one cubic yard covers — 6 inches is 0.5 feet, and 27 ÷ 0.5 = 54.
How much concrete do I need for a 12×40 driveway?
At 4 inches deep, a 12 × 40 driveway (480 square feet) needs 5.93 cubic yards — order 6.5 with waste. At the recommended 6 inches deep, it needs 8.89 cubic yards — order 10.
Does one cubic yard cover the same area for soil and mulch?
Yes, the volume is identical — one cubic yard is 27 cubic feet whatever the material. What changes is the depth: mulch is usually spread 2–3 inches deep, so one cubic yard covers 108–162 square feet.
Why does the coverage table say 81 square feet at 4 inches?
Because 4 inches is one-third of a foot, and 27 cubic feet divided by one-third of a foot is 81 square feet. The formula is coverage = 27 ÷ depth in feet.
