A 10 ft × 10 ft slab 3 inches deep needs 0.93 cubic yards of concrete — so you order 1 cubic yard. The calculation is length × width × depth in feet, divided by 27: 10 × 10 × 0.25 = 25 cubic feet, and 25 ÷ 27 = 0.93.
“How many cubic yards of concrete do I need?” is the question every slab project starts with, because the answer decides whether you call a ready-mix supplier or buy bags at the hardware store. A free cubic yard calculator gives you the exact number for your measurements — the tables and examples below show how that number is reached, so you can order with confidence.
How Deep Should a Concrete Slab Be?
Depth is the first decision, because it drives the volume more than length or width do. These are the standard depths used in the US for residential work:
- 3 inches — light foot traffic only: garden paths, shed bases, small pads. A thin slab cracks more easily, so this depth is only for areas that will never carry weight.
- 4 inches — the standard for patios, sidewalks, and shed floors. This is the default depth for most home slabs, and every table in this guide uses it unless stated otherwise.
- 5–6 inches — driveways, garage floors, and anything a vehicle will drive or park on. The extra depth spreads the load and resists cracking.
- 6–8 inches — heavy vehicles, RV pads, and commercial loading areas.
If you are unsure, 4 inches is the safe choice for a patio, and 6 inches for a driveway.
How Many Cubic Yards for a Slab at 4 Inches Deep?
Four inches is the standard slab depth, so this table answers the question for the sizes homeowners pour most often. Every figure uses the same formula: length × width × (4 ÷ 12) ÷ 27, rounded up to the nearest half yard with a 10% waste allowance included in the order column.
| Slab size | Cubic feet | Exact cubic yards | Order (with 10% waste) |
|---|---|---|---|
| 8 ft × 8 ft | 21.33 | 0.79 | 1 cubic yard |
| 10 ft × 10 ft | 33.33 | 1.23 | 1.5 cubic yards |
| 10 ft × 12 ft | 40.00 | 1.48 | 2 cubic yards |
| 12 ft × 12 ft | 48.00 | 1.78 | 2 cubic yards |
| 12 ft × 16 ft | 64.00 | 2.37 | 3 cubic yards |
| 16 ft × 20 ft | 106.67 | 3.95 | 4.5 cubic yards |
| 20 ft × 20 ft | 133.33 | 4.94 | 5.5 cubic yards |
The pattern to notice: doubling the slab’s length doubles the concrete, but going from 3 inches to 4 inches deep adds a third more volume to the same footprint. That is why confirming the depth before you order matters more than measuring the length to the inch.
Worked Example 1: A 10 ft × 10 ft Slab, 3 Inches Deep
The smallest common slab, and the example to check your arithmetic against:
- Depth in feet: 3 inches ÷ 12 = 0.25 feet.
- Volume in cubic feet: 10 × 10 × 0.25 = 25 cubic feet.
- Volume in cubic yards: 25 ÷ 27 = 0.93 cubic yards.
- Waste allowance: 0.93 × 1.10 = 1.02 cubic yards.
- Order: 1 cubic yard.
At this size, ready-mix is usually the better choice — one cubic yard is the typical minimum order for a truck, and mixing 56 bags of 60-lb concrete by hand is a long afternoon. Our step-by-step guide to how to calculate cubic yards works through the same formula for any shape, including round patios.
Worked Example 2: A 20 ft × 15 ft Patio, 4 Inches Deep
The standard patio pour at the standard depth:
- Depth in feet: 4 inches ÷ 12 = 0.33 feet.
- Volume in cubic feet: 20 × 15 × 0.33 = 100 cubic feet.
- Volume in cubic yards: 100 ÷ 27 = 3.70 cubic yards.
- Waste allowance: 3.70 × 1.10 = 4.07 cubic yards.
- Order: 4.5 cubic yards.
A patio this size is firmly in ready-mix territory: 100 cubic feet would need 223 bags of 60-lb mix, which no one mixes by hand in a day. The 10% allowance is doing real work here — without it, ordering 4 cubic yards would leave you 0.07 cubic yards short of the bare minimum, and any spillage or low spot would leave part of the patio unfinished.
Worked Example 3: A 12 ft × 40 ft Driveway, 4 Inches Deep
Driveways are where the numbers get big, and where getting the depth wrong gets expensive:
- Depth in feet: 4 inches ÷ 12 = 0.33 feet.
- Volume in cubic feet: 12 × 40 × 0.33 = 160 cubic feet.
- Volume in cubic yards: 160 ÷ 27 = 5.93 cubic yards.
- Waste allowance: 5.93 × 1.10 = 6.52 cubic yards.
- Order: 6.5 cubic yards.
Note that a driveway should really be 6 inches deep if cars will park on it. At 6 inches, the same driveway needs 12 × 40 × 0.5 = 240 cubic feet, which is 8.89 cubic yards — order 10 cubic yards with waste. That is nearly 50% more concrete for just two extra inches of depth, which is exactly why driveways cost what they do. If you are pricing a driveway, confirm the depth with your contractor before you compare quotes — a quote for 4 inches and a quote for 6 inches are quotes for different jobs.
How Many Bags of Concrete Equal One Cubic Yard?
For small jobs, bagged mix is the practical option — but you need to know how many bags to buy. Standard yields, printed on the bag label, are:
| Bag size | Yield per bag | Bags per cubic yard |
|---|---|---|
| 40-lb bag | 0.30 cubic feet | 90 bags |
| 60-lb bag | 0.45 cubic feet | 60 bags |
| 80-lb bag | 0.60 cubic feet | 45 bags |
For the 10 × 10 slab in Example 1 (25 cubic feet), that means 84 bags of 40-lb mix, 56 bags of 60-lb mix, or 42 bags of 80-lb mix. Always check the yield printed on the bag you actually buy; it varies slightly by brand and mix type.
Ready-Mix or Bags: How to Decide
| Job size | Best option | Why |
|---|---|---|
| Under 0.5 cubic yards | Bags | No delivery fee, mix as you go |
| 0.5–1 cubic yard | Bags or truck | Bags are fine; a truck saves hours of labour |
| 1–2 cubic yards | Ready-mix truck | 60–120 bags is too much hand mixing |
| Over 2 cubic yards | Ready-mix truck | Only practical option; order in half-yard steps |
What About Slabs That Are Not Rectangles?
Not every slab is a neat rectangle. For the shapes homeowners actually pour:
- L-shaped patio: split it into two rectangles, calculate each separately, and add them. A patio made of a 12 × 10 section plus a 6 × 8 section, both 4 inches deep, is (12 × 10 × 0.33) + (6 × 8 × 0.33) = 40 + 16 = 56 cubic feet, or 2.07 cubic yards — order 2.5 with waste.
- Round patio: area = π × radius², then multiply by depth and divide by 27. A round patio 10 feet across at 4 inches deep needs 0.97 cubic yards — order 1.
- Steps: calculate each step as its own small block and add them. Three steps, each 4 feet wide, 1 foot deep, and 7 inches high, are 3 × 4 × 1 × (7 ÷ 12) = 7 cubic feet, or 0.26 cubic yards — usually poured from the same order as the slab they lead to.
For any of these, a free cubic yards calculator handles the shape arithmetic — but the rectangle method above covers 90% of real slabs.
Common Mistakes When Ordering Concrete for a Slab
- Measuring the hole, not the slab. The gravel base under a slab is not concrete. Measure the finished slab depth — 4 inches of concrete over 4 inches of gravel needs 4 inches of concrete, not 8.
- Forgetting the waste allowance. Ground is never perfectly level, forms flex, and some concrete always stays in the wheelbarrow. Add 10% on every order.
- Rounding down to save money. Saving half a cubic yard is not worth a cold joint — the visible line where fresh concrete meets concrete that has already started to set. Always round up.
- Ordering bags by weight, not volume. A 60-lb bag and an 80-lb bag hold different volumes. Count bags by the yield on the label (0.45 vs 0.60 cubic feet), not by the weight on the front.
Frequently Asked Questions
How many cubic yards of concrete do I need for a 10×10 slab?
At 3 inches deep, a 10 × 10 slab needs 0.93 cubic yards — order 1. At the standard 4 inches deep, it needs 1.23 cubic yards — order 1.5.
How many cubic yards for a 12×12 patio?
At 4 inches deep, a 12 × 12 patio is 48 cubic feet, or 1.78 cubic yards. With a 10% waste allowance that is 1.96, so order 2 cubic yards.
How many bags of concrete do I need for 1 cubic yard?
It takes 60 bags of 60-lb mix, 45 bags of 80-lb mix, or 90 bags of 40-lb mix to make one cubic yard. Check the yield printed on your bag label — it is usually 0.45, 0.60, or 0.30 cubic feet.
Is 4 inches thick enough for a concrete slab?
Yes, for patios, sidewalks, and shed floors. Driveways and garage floors need 5–6 inches, because vehicles concentrate far more weight on a small area.
Should I order extra concrete?
Yes — add 10% to your calculated volume, then round up to the nearest half yard. The cost of a little extra concrete is far less than a second delivery or an unfinished pour.
How much does one cubic yard of concrete cover?
One cubic yard covers 81 square feet at 4 inches deep, 108 square feet at 3 inches, and 54 square feet at 6 inches. Our coverage guide has the full table by depth.
