How Many Bricks Do I Need? Wall Calculator Guide

How many bricks do I need for a wall? A 10 × 3 m wall built with 190 × 90 × 90 mm bricks and a 10 mm mortar joint needs exactly 1,500 bricks — 1,575 with 5% waste. The rule is simple: divide the wall area by the area one brick occupies in the wall (the brick plus its mortar joint), deduct the doors and windows, then add 5–10% for waste. This guide shows the formula, the brick sizes, the mortar maths and three worked examples, so you can work out any wall by hand — or skip the arithmetic with a free brick calculator.

Ordering bricks by guess is how jobs go wrong in both directions. Order too few and the wall stops halfway: a second delivery costs more than the bricks, and the new batch may not match the colour of the first. Order too many and you own pallets of spares nobody wants, at $0.50 a brick. The maths takes two minutes, and this guide does it with real numbers you can check.

How Do You Calculate How Many Bricks You Need?

Divide the net wall area by the brick module face, then add waste. The net wall area is the length times the height, minus the doors and windows. The module face is the area one brick occupies in the finished wall — the brick plus its share of mortar joint. Then multiply by 1.05 for 5% waste, or 1.10 for 10%.

  • Wall area = length × height
  • Net area = wall area − doors − windows
  • Module face = (brick length + joint) × (brick height + joint)
  • Bricks = net area ÷ module face
  • Bricks to order = bricks × (1 + waste%)

The lead example: a 10 × 3 m wall is 30 m². A 190 × 90 mm brick face with a 10 mm joint occupies 200 × 100 mm, or 0.02 m². So 30 ÷ 0.02 = 1,500 bricks exactly. With 5% waste: 1,500 × 1.05 = 1,575. With 10% waste: 1,500 × 1.10 = 1,650. That is the whole method — everything else on this page is applying it to different walls, different brick sizes and different openings.

Why the Mortar Joint Changes the Answer

The single most common brick-counting mistake is forgetting the mortar joint. A brick in a wall is not just the brick: it is the brick plus its share of mortar. The joint is usually 10 mm thick, and it is added to the brick’s length and height before you divide.

For the lead wall, the bare brick face is 190 × 90 mm = 0.0171 m². Divide 30 m² by that and you get 1,754 bricks — 254 too many, about $127 wasted at $0.50 each. The joint is not a rounding error: it is 10 mm on every brick, in both directions, and over 1,500 bricks it adds up to a quarter of the wall’s volume in mortar. Always add the joint first, then divide. The brick calculator builds the joint into the module face automatically, but if you are working by hand, the joint is the step to double-check.

What Size Is a Brick? Standard, Modular, Queen, King and Utility

Bricks are not one size, and the size you pick changes the count a lot. The Brick Industry Association (BIA) lists the standard US sizes, and for the same 30 m² wall a Modular brick needs 2,195 bricks while a King brick needs only 1,476 — a difference of 719 bricks. Bigger bricks lay faster and use less mortar per square metre, but they are heavier and cost more each, so the saving in count is partly offset by the price per brick.

Brick size (BIA)Size (L × D × H)Module face (10 mm joint)Bricks per m²Bricks for 30 m²To order (5% waste)
Standard203 × 92 × 57 mm213 × 67 mm = 0.014271 m²70.072,1022,207
Modular194 × 92 × 57 mm204 × 67 mm = 0.013668 m²73.162,1952,305
Queen194 × 92 × 70 mm204 × 80 mm = 0.016320 m²61.271,8381,930
King244 × 92 × 70 mm254 × 80 mm = 0.020320 m²49.211,4761,550
Utility295 × 92 × 102 mm305 × 112 mm = 0.034160 m²29.27878922
Lead brick (metric)190 × 90 × 90 mm200 × 100 mm = 0.020000 m²50.001,5001,575

The lead brick on this page, 190 × 90 × 90 mm, is a common metric size: exactly 50 bricks per square metre, which is why the 30 m² wall comes out at exactly 1,500. Before you calculate, check the size printed on the brick or on your supplier’s data sheet — Standard and Modular bricks look alike but need different counts (2,102 vs 2,195 for the same wall), and never mix sizes in one wall.

How Many Bricks for a 10 × 3 m Wall? The Worked Example

This is the example every other number on this page is checked against. Wall: 10 m long, 3 m high, single-brick thickness 102.5 mm. Brick: 190 × 90 × 90 mm. Joint: 10 mm. Waste: 5%.

  1. Wall area = 10 × 3 = 30 m².
  2. Module face = (190 + 10) × (90 + 10) = 200 × 100 mm = 0.02 m².
  3. Bricks = 30 ÷ 0.02 = 1,500 exactly.
  4. With 5% waste = 1,500 × 1.05 = 1,575 bricks to order. With 10% waste: 1,650.
  5. Mortar: wall volume = 30 × 0.1025 = 3.075 m³; brick volume = 1,500 × 0.19 × 0.09 × 0.09 = 2.3085 m³; wet mortar = 3.075 − 2.3085 = 0.7665 m³, or 27.1 cu ft.
  6. Cement and sand (1:6 mix): dry mortar = 0.7665 × 1.33 = 1.0194 m³; cement = 1.0194 ÷ 7 × 1,440 = 209.7 kg, which is 4.19 × 50 kg bags — buy 5; sand = 1.0194 × 6 ÷ 7 = 0.8738 m³.
  7. Cost, weight, pallets: 1,500 × $0.50 = $750.00 ($787.50 with 5% waste); 1,500 × 2.5 kg = 3,750 kg (3.75 t); 1,500 ÷ 500 = 3 pallets.

Two built-in checks prove the arithmetic: bricks × module face = 1,500 × 0.02 = 30 m² (the wall area), and brick volume + mortar volume = 2.3085 + 0.7665 = 3.075 m³ (the wall volume). If your numbers fail either check, something is wrong — usually the joint left out.

How Many Bricks for a Garden Wall? 5 × 2.5 m, Modular

A garden wall is the same maths on a smaller wall, with a different brick. Wall: 5 m long, 2.5 m high. Brick: Modular, 194 × 92 × 57 mm. Joint: 10 mm. Waste: 5%.

  1. Wall area = 5 × 2.5 = 12.5 m².
  2. Module face = (194 + 10) × (57 + 10) = 204 × 67 mm = 0.013668 m².
  3. Bricks = 12.5 ÷ 0.013668 = 914.5 → 915 bricks.
  4. With 5% waste = 914.5 × 1.05 = 960.3 → 960 bricks to order.
  5. Mortar = wall volume (12.5 × 0.1025 = 1.2812 m³) minus brick volume (915 × 0.194 × 0.092 × 0.057 = 0.9309 m³) = 0.3504 m³, or 12.4 cu ft.
  6. Cement and sand: dry mortar = 0.3504 × 1.33 = 0.4660 m³; cement = 0.4660 ÷ 7 × 1,440 = 95.9 kg — buy 2 × 50 kg bags; sand = 0.4660 × 6 ÷ 7 = 0.399 m³.
  7. Cost: 960 × $0.50 = $480.00.

Note the rounding: the exact count is 914.5, which rounds to 915, and the waste is applied to the exact count (914.5 × 1.05 = 960.3 → 960), not to the rounded one. A garden wall is also the case for 10% waste rather than 5% if it has piers, curves or many cuts — 914.5 × 1.10 = 1,006 bricks.

How Many Bricks Do I Need If the Wall Has a Door and a Window?

Openings come out of the wall area before you divide — a door and a window are not bricks. Take the same 10 × 3 m lead wall, minus one standard door (0.9 × 2.1 m) and one window (1.2 × 1.2 m).

  1. Door area = 0.9 × 2.1 = 1.89 m². Window area = 1.2 × 1.2 = 1.44 m². Openings total 3.33 m².
  2. Net area = 30 − 3.33 = 26.67 m².
  3. Bricks = 26.67 ÷ 0.02 = 1,333.5 → 1,333 bricks.
  4. With 5% waste = 1,333.5 × 1.05 = 1,400.2 → 1,400 bricks to order.
  5. Mortar = wall volume (26.67 × 0.1025 = 2.7337 m³) minus brick volume (1,333 × 0.19 × 0.09 × 0.09 = 2.0515 m³) = 0.6822 m³, or 24.1 cu ft.

Skipping the deduction would over-order by 167 bricks — about $83.50 at $0.50 each. On a house with many openings, the waste is far bigger. Measure every opening, deduct it, and remember the lintels: the brickwork above a door or window still needs counting, but the opening itself does not. The brick calculator takes the door and window count and size and deducts them for you.

How Many Bricks per Square Metre — and per Square Foot?

Some suppliers quote bricks per square metre, which is a quick way to estimate without measuring twice. For the lead brick, the figure is exactly 50 bricks per m² (1 ÷ 0.02 m²). For the other sizes: Standard 70.07, Modular 73.16, Queen 61.27, King 49.21 and Utility 29.27 bricks per m². Multiply the wall area in m² by the per-m² figure and you have the count — then add waste.

In imperial units, the lead brick needs 4.65 bricks per square foot. The lead wall is 30 m² = 322.92 sq ft, and 322.92 × 4.65 = 1,500 bricks — the same answer, as it must be. If you work in feet, find the area with a square footage calculator and let the brick calculator convert it (feet × 0.3048 = metres).

How Much Mortar, Cement and Sand Do I Need?

Bricks are only part of the order. Mortar is the wall volume minus the brick volume, and on the lead wall it is 0.7665 m³ of wet mortar — a quarter of the wall’s volume. The full split for the lead wall: dry mortar = 0.7665 × 1.33 = 1.0194 m³ (dry ingredients take up more space than wet mortar, so estimators multiply by 1.33), cement = 1.0194 ÷ 7 × 1,440 = 209.7 kg, sand = 1.0194 × 6 ÷ 7 = 0.8738 m³. That is 5 × 50 kg bags of cement — 4.19 bags exact, rounded up, because you cannot buy 0.19 of a bag.

Mortar changes with brick size even for the same wall, because bigger bricks fill more of the wall volume: Standard bricks leave 0.84 m³ (29.6 cu ft) of mortar in a 30 m² wall, King bricks 0.76 m³ (26.7 cu ft) and Utility bricks 0.64 m³ (22.8 cu ft). These figures assume a standard 1:6 cement-sand mix and the 1.33 dry-volume factor — your mix or supplier may differ, so confirm before ordering. If your supplier sells mortar by the cubic yard rather than the cubic metre, convert with a cubic yard calculator: 0.7665 m³ is almost exactly 1 cubic yard.

What Waste Percentage Should I Add for Bricks?

Waste is the extra bricks ordered for breakages, cuts and chipped units — and the right percentage depends on the wall. Use 5% for a straight, plain wall with few openings: the lead wall needs 1,575 bricks, not 1,500. Use 10% for walls with many cuts, corners, curves, arches or piers: the same wall then needs 1,650. Use more still — 10–15% — for reclaimed or handmade bricks, which break more often, and for patterned brickwork where cutting wastes more.

The cost of the waste is small against the cost of running short: 75 extra bricks is $37.50 at $0.50 each, while a second delivery and a batch colour change can cost far more. Order the with-waste number. If bricks are left over, clean spares are useful for future repairs — keep a few from the same batch.

Common Mistakes When Working Out How Many Bricks You Need

  1. Forgetting the mortar joint. Dividing by the bare brick face gives 1,754 bricks for the lead wall instead of 1,500 — 254 too many.
  2. Not deducting doors and windows. One door and one window cost 167 bricks ($83.50) if you forget them.
  3. Ordering the bare count. The wall needs 1,500 bricks; the order is 1,575. Bricks break, and running short costs a second delivery.
  4. Using the wrong brick size. Standard (2,102) and Modular (2,195) look alike but differ by 93 bricks on the same wall.
  5. Mixing units. Feet and metres in the same calculation silently wreck the answer — convert everything to one unit first (1 ft = 0.3048 m).
  6. Forgetting the mortar. The lead wall also needs 5 bags of cement and 0.87 m³ of sand. Bricks without mortar stop the job on day one.
  7. Measuring the plan, not the wall. Measure on site, twice. A 10 cm error on a 10 m wall is 15 bricks; a height measured to the eaves instead of the wall top is far worse.

FAQ: How Many Bricks Do I Need?

How many bricks do I need for a 10 × 3 m wall?
Exactly 1,500 bricks with 190 × 90 × 90 mm bricks and a 10 mm joint — 1,575 with 5% waste, or 1,650 with 10%. The module face is 0.02 m², so 30 ÷ 0.02 = 1,500.

How many bricks are in a square metre?
50 for the lead brick (190 × 90 × 90 mm, 10 mm joint). Standard 70.07, Modular 73.16, Queen 61.27, King 49.21 and Utility 29.27 bricks per m².

How many bricks do I need for a garden wall?
A 5 × 2.5 m garden wall with Modular bricks needs 915 bricks — 960 with 5% waste — plus 0.35 m³ of wet mortar, 2 bags of cement and 0.40 m³ of sand, costing $480.00 for the bricks.

Do I deduct doors and windows from the brick count?
Yes. Deduct each opening’s area from the wall area before dividing. A door (0.9 × 2.1 m) and a window (1.2 × 1.2 m) take a 10 × 3 m wall from 1,500 bricks to 1,333 — 1,400 with 5% waste.

How much mortar do I need for 1,500 bricks?
0.77 m³ of wet mortar (27.1 cu ft) for a 10 × 3 m single-brick wall — 5 bags of cement (209.7 kg) and 0.87 m³ of sand with a 1:6 mix.

What is the waste percentage for bricks?
5% for a straight wall, 10% for walls with many cuts, corners or curves. Order the with-waste number — 1,575, not 1,500, for the lead wall.

Try the Brick Calculator

Measure your wall, pick your brick size, add your doors and windows, and the free brick calculator gives you the brick count with and without waste, the mortar, cement and sand, the cost, the pallets and the weight — with every step shown. For the money side, our brick wall cost calculator guide prices the whole job: bricks, mortar, delivery and labour. And if you are still measuring, the square footage calculator and the construction calculators hub cover the rest of the job.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top