Percentage Increase vs Decrease: Formulas, Table, and When to Use Each

Percentage increase and percentage decrease come from the same formula — only the sign of the answer differs. A rise from 100 to 125 is a 25% increase, while the fall back from 125 to 100 is a 20% decrease, even though the gap is $25 in both directions. The reason is the base: each change is measured against the value it started from, and the starting value is different in each direction.

What Is the Difference Between Percentage Increase and Decrease?

A percentage increase describes growth: the new value is larger than the original, the difference is positive, and the formula returns a positive number. A percentage decrease describes a fall: the new value is smaller, the difference is negative, and the formula returns a negative number that we usually quote as a positive “decrease of X%.”

Both use the same formula: Percent change = ((New value − Original value) ÷ Original value) × 100. If the result is positive, the value increased; if it is negative, it decreased by that amount. The free Percentage Increase/Decrease Calculator from Calcrio reports all three readings — increase, decrease, and overall percent change — from the same two numbers, so you never need a separate tool for each direction.

What Are the Formulas for Percentage Increase and Decrease?

The two formulas look almost identical, because they are the same calculation with the subtraction written in the direction that gives a positive answer.

Percentage increase = ((New value − Original value) ÷ Original value) × 100

Percentage decrease = ((Original value − New value) ÷ Original value) × 100

The second formula is simply the first one with the sign flipped: a decrease of 20% is a percent change of −20%. The critical point in both is the denominator. It is the original value in both cases — the number you started from — never the new value. A worked pair makes this concrete. From 100 to 125, the increase is (125 − 100) ÷ 100 × 100 = 25%. From 125 back to 100, the decrease is (125 − 100) ÷ 125 × 100 = 20%. The dollar gap is $25 both ways; the percentages differ because the bases differ.

Percentage Increase vs Decrease: Comparison Table

FeaturePercentage increasePercentage decrease
DirectionNew value is larger than the originalNew value is smaller than the original
Sign of percent changePositive (+25%)Negative (−20%), quoted as “20% decrease”
Formula(New − Original) ÷ Original × 100(Original − New) ÷ Original × 100
MultiplierGreater than 1 (1.25 for +25%)Less than 1 (0.80 for −20%)
Maximum sizeNo limit — can exceed 100%Capped at 100% (a fall to zero)
Example100 → 125 is +25%125 → 100 is −20%
Reverse needed to undo itA 25% rise needs a 20% fallA 20% fall needs a 25% rise
Typical usesRaises, price rises, sales growth, grades improvingDiscounts, salary cuts, weight loss, investment losses

Why Are the Same Two Numbers Different Percentages in Each Direction?

The asymmetry is the single most misunderstood fact about percentages, so it deserves a full explanation. Percentages are relative, and “relative to what?” changes when the direction changes. Going up, the base is the smaller number; going down, the base is the larger number. A fixed gap is a bigger share of a small base than of a large one, so the upward percentage is always larger than the downward percentage for the same pair of numbers.

Take 80 and 100. Rising from 80 to 100 is (100 − 80) ÷ 80 × 100 = 25%. Falling from 100 to 80 is (100 − 80) ÷ 100 × 100 = 20%. The gap is $20 either way, but it is a quarter of 80 and only a fifth of 100. The same pattern holds for every pair: 200 to 250 is +25% going up and −20% coming down; 50 to 75 is +50% going up and −33.33% coming down. The bigger the change, the bigger the asymmetry — a rise of 100% (doubling) needs only a 50% fall to undo it.

Worked Examples Side by Side

A Salary: Raise Versus Cut

A salary rises from $50,000 to $65,000: the gain is $15,000, and 15,000 ÷ 50,000 × 100 = a 30% increase. If the same salary were later cut from $65,000 back to $50,000, the loss is the same $15,000, but 15,000 ÷ 65,000 × 100 = a 23.08% decrease. The raise and the cut are the same dollars in opposite directions, yet the percentages differ by nearly seven points. Anyone negotiating a pay cut to match an earlier raise should know this: a 30% rise is undone by a 23.08% fall, not by a 30% fall — a 30% cut from $65,000 would leave $45,500, below the original salary.

A Price: Markup Versus Discount

A shop marks a $120 item up to $150: (150 − 120) ÷ 120 × 100 = a 25% increase. The same item on sale from $150 back to $120 is (150 − 120) ÷ 150 × 100 = a 20% decrease. Retailers exploit this asymmetry in both directions: a “25% markup” sounds smaller than the “20% off” that reverses it, even though they describe the same two prices. For the discount direction in full, see our percentage decrease examples, and for working backwards from a sale price, how to find the original price before a percentage increase.

An Investment: Gain Versus Loss

An investment grows from $200 to $250, a 25% gain. If it then falls back to $200, that is a 20% loss. Investors feel this asymmetry directly: a portfolio that falls 50% must double — a 100% gain — just to break even. The recovery table below gives the exact figures, and it is the reason experienced investors talk more about avoiding losses than chasing gains: losses demand disproportionately large recoveries.

A Test Score: Improvement Versus Decline

A student scores 75 on one test and 120 on the next — a different scale, but the math is identical: (120 − 75) ÷ 75 × 100 = a 60% increase. If the score fell from 120 back to 75, the decline would be (120 − 75) ÷ 120 × 100 = a 37.5% decrease. Teachers quoting percentage changes should always state the direction and the base, because “up 60%” and “down 37.5%” describe the same two scores.

How Much Increase Does It Take to Recover a Decrease?

DecreaseValue after a $100 startIncrease needed to recover
10%$9011.11%
20%$8025%
25%$7533.33%
33.33%$66.6750%
50%$50100%

The formula for the recovery percentage is p ÷ (100 − p) × 100, where p is the decrease. After a 20% fall, $100 becomes $80, and 25% of $80 is $20, restoring the $100. The mirror formula — the decrease needed to undo an increase of p% — is p ÷ (100 + p) × 100: a 25% rise needs a 20% fall, and a 50% rise needs a 33.33% fall. Keep both formulas in mind whenever a report claims a rise and a fall “cancel out” — they never do, unless the percentages are adjusted for the changed base.

When Should You Use Percentage Increase, and When Decrease?

Use percentage increase when the story is growth: a raise, a price rise, sales growth, a grade improving, a population growing, an investment gaining. Use percentage decrease when the story is a fall: a discount, a salary cut, weight loss, a bill shrinking, an investment losing value, enrollment declining. The choice is determined by the direction of the change, not by preference — but the framing matters. “Sales fell 20%” and “sales are 80% of last year” describe the same fact; the first emphasizes the loss, the second emphasizes what remains. Honest reporting gives the percentage, the starting value, and the new value together, so the reader never has to guess the base.

Where neither word fits, “percent change” is the right term — for example, a value that could move either way, or a comparison where the direction is the finding. When the change is measured over several years, the CAGR Calculator expresses it as a smooth yearly rate, while the Compound Interest Calculator shows how repeated percentage increases build wealth over time.

Which Is Bigger: a 25% Increase or a 25% Decrease?

Neither — they are equal as percentages but unequal as amounts, because they sit on different bases: a 25% increase on $100 adds $25, while a 25% decrease on $125 removes $31.25. The most-searched pair in this topic, the percentage increase from 187 to 272 — a 45.5% rise — makes the same point: the matching fall from 272 back to 187 would be only 31.25% of 272. For the mistakes people make when they forget this, see our percentage increase mistakes to avoid. All five guides are listed from the math calculators hub on Calcrio.

Frequently Asked Questions

What is the difference between percentage increase and percentage decrease?

Percentage increase measures growth from an original value to a larger new value; percentage decrease measures a fall to a smaller new value. Both use the same formula, ((New − Original) ÷ Original) × 100 — only the sign differs.

Is 100 to 125 a 25% increase and 125 to 100 a 25% decrease?

No. 100 to 125 is a 25% increase, but 125 to 100 is a 20% decrease. The gap is $25 both ways, but the decrease is measured against the larger base of 125.

How do you calculate percentage increase vs decrease?

Use Percent change = ((New − Original) ÷ Original) × 100. A positive result is an increase; a negative result is a decrease of that size. Always divide by the original value.

How much increase is needed to recover from a 50% decrease?

A 100% increase. After a 50% fall, $100 becomes $50, and doubling it (a 100% rise) is the only way back to $100.

Can a percentage decrease be more than 100%?

No. A 100% decrease leaves zero, and a value cannot fall by more than all of itself. Percentage increases, by contrast, have no upper limit.

When should I say percent change instead of increase or decrease?

Use percent change when the direction is the finding rather than the premise — for example, when comparing two values without knowing in advance which is larger, or when a value could move either way.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top