Brick Calculator — 10×3 m Wall = 1,500 Bricks | Calcrio
Home › Calculators › Brick Calculator
Free • Browser-Based • No Sign-In

Brick Calculator — How Many Bricks, How Much Mortar & What It Costs

A 10 × 3 m wall built with 190 × 90 × 90 mm bricks and a 10 mm mortar joint needs exactly 1,500 bricks — 1,575 with 5% waste — plus 0.77 m³ of mortar (27.1 cu ft), 5 bags of cement and 0.87 m³ of sand, for $750.00 in bricks ($787.50 with waste). This free brick calculator works out the brick count, mortar, cement, sand, cost, pallets and weight for any wall — with every step shown, so you can check it by hand.

Method: wall area ÷ brick module face (brick + mortar joint), minus doors and windows, plus waste. An estimate for ordering — confirm quantities with your supplier and builder.
Construction Tool

Brick Calculator

Enter your wall size and the calculator finds how many bricks you need, how much mortar, cement and sand, what it costs, how many pallets to order and how much it all weighs. Calculations run in your browser — nothing is sent anywhere. Part of our Construction Calculators collection.

Wall, door and window sizes in metres or feet. Brick sizes stay in millimetres (standard sizes).
Length × depth × height. Bigger bricks mean fewer bricks per wall.
10 m in the lead example (32.81 ft).
3 m in the lead example (9.84 ft).
Thickness sets the wall volume for mortar. A double-brick wall uses twice the bricks.
10 mm is standard. The joint is added to the brick length and height to get the module face.
5% is standard for a straight wall; use 10% for walls with many cuts, corners or curves.
$0.50 per brick in the lead example. Enter your supplier's price.
2.5 kg per brick in the lead example. Check your brick's data sheet — sizes vary.
500 is the usual pallet size. Confirm with your supplier.
How many door openings in this wall? Each one is deducted from the wall area.
0.9 × 2.1 m is a standard door. Width × height, in the unit picked above.
How many window openings in this wall?
1.2 × 1.2 m is a typical window. Width × height, in the unit picked above.
—
—
—
—
—
—
—
—
—
—
—
—
Enter your wall size, then press Calculate.
AI Citation Quick Answer

What Is a Brick Calculator?

Quick Answer: A brick calculator finds how many bricks a wall needs from its length, height and thickness, brick size, mortar joint, waste and openings. A 10 × 3 m wall with 190 × 90 × 90 mm bricks and a 10 mm joint needs exactly 1,500 bricks — 1,575 with 5% waste — plus 0.77 m³ of mortar.

A brick calculator answers the first question on any masonry job: how many bricks do I need? Give it a 10 × 3 m wall, a 190 × 90 × 90 mm brick and a 10 mm mortar joint, and it finds exactly 1,500 bricks — 1,575 with 5% waste — plus 0.77 m³ of mortar (27.1 cu ft), 5 bags of cement and 0.87 m³ of sand. It also works out the cost ($750.00 for the bricks, $787.50 with waste at $0.50 each), the pallets (3 at 500 per pallet) and the weight (3,750 kg). Every answer shows the step-by-step working, so you can check it by hand before you order. This page is part of Calcrio's Construction Calculators collection.

An estimate for ordering: brick sizes, joint widths and waste vary by supplier, bricklayer and job. Use these numbers to order and budget — then confirm the final quantities with your supplier and builder.

How to Use the Brick Calculator

Measure the wall, pick the brick, add the openings — the calculator does the rest.

Wall SizeEnter length and height in metres (or feet), and thickness: single brick 102.5 mm or double brick 215 mm. The lead wall is 10 × 3 m.
Brick Size & JointPick Standard, Modular, Queen, King, Utility or the 190 × 90 × 90 mm lead brick. The mortar joint defaults to 10 mm — the standard.
Bricks, Mortar, CostThe headline result — 1,500 bricks on the lead wall — plus mortar volume, cement bags, sand, cost, pallets and weight.
Doors & WindowsEnter the count and size of each opening. A door (0.9 × 2.1 m) and a window (1.2 × 1.2 m) take 1,500 bricks down to 1,333.
Waste %5% is standard for a straight wall. Use 10% for walls with many cuts, corners, curves or arches.
Step TableEvery calculation shows the wall area, the module face, the count, the waste and the mortar maths, so the working can be checked by hand.
  1. Pick metres or feet for the wall, door and window sizes.
  2. Enter the wall length and height — 10 m by 3 m in the lead example.
  3. Pick the wall thickness — single brick (102.5 mm) or double brick (215 mm).
  4. Pick the brick size and check the mortar joint (10 mm) and waste (5%).
  5. Add doors and windows — count and size for each — so they are deducted from the wall area.
  6. Enter your brick price, brick weight and pallet size if you know them, or keep the defaults ($0.50, 2.5 kg, 500).
  7. Select Calculate to see the brick count with and without waste, mortar, cement and sand, cost, pallets and weight, with the step table underneath.

Remember what the number is: an estimate for ordering. Bricks break, joints vary, and no two walls are identical — that is exactly why the waste percentage exists. Order the "with waste" number, not the bare count.

What Is a Brick Calculator?

A brick calculator works out how many bricks a wall needs — and how much mortar, cement, sand and money goes with them — from the wall's size and the brick's size. Ordering by guess is how jobs run short halfway through a wall (and a second delivery costs more than the bricks) or end up with pallets of spares nobody wants. The maths is simple division, but it has three traps: the mortar joint, the openings, and the waste. This calculator handles all three.

Wall area = Length × Height  ·  Net area = Wall area − Doors − Windows
Module face = (Brick length + Joint) × (Brick height + Joint)
Bricks = Net area ÷ Module face  ·  Bricks to order = Bricks × (1 + Waste%)
Mortar (wet) = Wall volume − Brick volume  ·  Wall volume = Net area × Thickness
Dry mortar = Wet mortar × 1.33  ·  1:6 mix: Cement = Dry ÷ 7, Sand = Dry × 6 ÷ 7
Cost = Bricks to order × Price  ·  Weight = Bricks × Brick weight  ·  Pallets = Bricks ÷ Pallet size

The key idea is the module face: a brick in a wall is not just the brick — it is the brick plus its share of mortar. A 190 × 90 mm brick face with a 10 mm joint occupies 200 × 100 mm in the wall, or 0.02 m². Divide the wall area by that, and you get the count. Forget the joint and you under-order by about 10% — the single most common brick-counting mistake.

Brick Sizes: Standard, Modular, Queen, King and Utility

Bricks are not one size. The Brick Industry Association (BIA) lists the standard US sizes, and the size you pick changes the count a lot — for the same 30 m² wall, a Modular brick needs 2,195 bricks while a King brick needs only 1,476. Bigger bricks lay faster and use less mortar per square metre, but they are heavier and cost more each. The lead example on this page uses a 190 × 90 × 90 mm brick, a common metric size.

Brick size (BIA)Size (L × D × H)Module face*Bricks for a 30 m² wall
Standard203 × 92 × 57 mm213 × 67 mm = 0.014271 m²2,102
Modular194 × 92 × 57 mm204 × 67 mm = 0.013668 m²2,195
Queen194 × 92 × 70 mm204 × 80 mm = 0.016320 m²1,838
King244 × 92 × 70 mm254 × 80 mm = 0.020320 m²1,476
Utility295 × 92 × 102 mm305 × 112 mm = 0.034160 m²878
Lead brick (metric)190 × 90 × 90 mm200 × 100 mm = 0.020000 m²1,500

*Module face = (length + 10 mm joint) × (height + 10 mm joint). Counts are the exact division rounded to whole bricks, before waste. With 5% waste, add 5%: Standard 2,207; Modular 2,305; Queen 1,930; King 1,550; Utility 922; lead brick 1,575.

How Much Mortar, Cement and Sand?

Mortar is the wall volume minus the brick volume. For the lead wall: wall volume is 10 × 3 × 0.1025 m = 3.075 m³; the 1,500 bricks occupy 1,500 × 0.19 × 0.09 × 0.09 = 2.3085 m³; the difference is 0.7665 m³ of wet mortar (27.1 cu ft). Dry mortar ingredients take up more space than wet mortar, so estimators multiply by 1.33: 1.0194 m³ dry. With a standard 1:6 cement-sand mix, that is 1.0194 ÷ 7 = 209.7 kg of cement (4.19 × 50 kg bags — round up to 5) and 1.0194 × 6 ÷ 7 = 0.8738 m³ of sand. Our companion guide on how many bricks you need walks through the same maths for other wall sizes, and the brick wall cost calculator guide prices the whole job — bricks, mortar, delivery and labour.

Key idea: the mortar joint is not a rounding error. On the lead wall it is 0.7665 m³ of mortar — a quarter of the wall's volume. A calculator that ignores the joint under-orders bricks by ~10% and forgets the mortar entirely. Count the joint, count the openings, add the waste — then order.

Brick Calculator Worked Examples

Every row below is computed exactly from the formulas above — hand-verified in Python — so you can check each one by hand. All sizes use a 10 mm mortar joint unless stated otherwise.

ScenarioWall areaBricks (no waste)Bricks to order (5% waste)Mortar (wet)
Lead wall 10 × 3 m, 190 × 90 × 90 mm30.00 m²1,5001,5750.77 m³ (27.1 cu ft)
Garden wall 5 × 2.5 m, Modular12.50 m²9159600.35 m³ (12.4 cu ft)
Lead wall minus door + window26.67 m²1,3331,4000.68 m³ (24.1 cu ft)
Same wall, Standard bricks30.00 m²2,1022,2070.84 m³ (29.6 cu ft)
Same wall, King bricks30.00 m²1,4761,5500.76 m³ (26.7 cu ft)
Same wall, Utility bricks30.00 m²8789220.64 m³ (22.8 cu ft)
Lead wall, 10% waste30.00 m²1,5001,6500.77 m³ (27.1 cu ft)

Mortar depends on the wall volume and the brick volume, not on the brick count alone — so it changes with brick size even for the same wall: Standard bricks leave 0.84 m³ of mortar in a 30 m² wall, King bricks 0.76 m³ and Utility bricks 0.64 m³, because bigger bricks fill more of the wall volume. The garden-wall mortar (0.35 m³) and the door-and-window mortar (0.68 m³) are computed the same way: net wall volume minus brick volume.

The lead example, step by step: a 10 × 3 m wall, 190 × 90 × 90 mm bricks, 10 mm joint, single-brick thickness 102.5 mm. Wall area = 10 × 3 = 30 m². Module face = (190 + 10) × (90 + 10) = 200 × 100 mm = 0.02 m². Bricks = 30 ÷ 0.02 = 1,500 exactly. With 5% waste: 1,500 × 1.05 = 1,575; with 10%: 1,650. Wall volume = 30 × 0.1025 = 3.075 m³; brick volume = 1,500 × 0.19 × 0.09 × 0.09 = 2.3085 m³; wet mortar = 3.075 − 2.3085 = 0.7665 m³ (27.1 cu ft). Dry mortar = 0.7665 × 1.33 = 1.0194 m³; cement = 1.0194 ÷ 7 × 1,440 = 209.7 kg (4.19 bags — buy 5); sand = 1.0194 × 6 ÷ 7 = 0.8738 m³. Weight = 1,500 × 2.5 = 3,750 kg (3.75 t); pallets = 1,500 ÷ 500 = 3; cost = 1,500 × $0.50 = $750.00 ($787.50 with 5% waste).

The Garden Wall, Step by Step

A 5 × 2.5 m garden wall, Modular bricks (194 × 92 × 57 mm), 10 mm joint, 5% waste. Wall area = 5 × 2.5 = 12.5 m². Module face = (194 + 10) × (57 + 10) = 204 × 67 mm = 0.013668 m². Bricks = 12.5 ÷ 0.013668 = 914.5 → 915. With 5% waste: 914.5 × 1.05 = 960.3 → 960 bricks to order. At $0.50 each that is $480.00 — a small wall, but the same maths.

The Door and Window Deduction, Step by Step

The same 10 × 3 m lead wall, minus one door (0.9 × 2.1 m) and one window (1.2 × 1.2 m). Door area = 0.9 × 2.1 = 1.89 m²; window area = 1.2 × 1.2 = 1.44 m²; openings total 3.33 m². Net area = 30 − 3.33 = 26.67 m². Bricks = 26.67 ÷ 0.02 = 1,333.5 → 1,333. With 5% waste: 1,333.5 × 1.05 = 1,400.2 → 1,400 bricks to order. Skipping the deduction would over-order by 167 bricks — about $83.50 at $0.50 each.

How to Calculate Bricks for a Wall, Step by Step

Follow this recipe for the lead example — a 10 × 3 m wall, 190 × 90 × 90 mm bricks, 10 mm joint, single-brick thickness.

Wall area = 10 × 3 = 30 m²
Module face = (190 + 10) × (90 + 10) = 200 × 100 mm = 0.02 m²
Bricks = 30 ÷ 0.02 = 1,500  ·  With 5% waste: 1,500 × 1.05 = 1,575
Wet mortar = 3.075 − 2.3085 = 0.7665 m³ (27.1 cu ft)  ·  Cement 209.7 kg (5 bags)  ·  Sand 0.8738 m³
  1. Measure the wall: length × height. 10 × 3 = 30 m².
  2. Deduct the openings: door area + window area, subtracted from the wall area. (None on the plain lead wall; the door-and-window example above deducts 3.33 m².)
  3. Add the joint to the brick: (190 + 10) × (90 + 10) = 200 × 100 mm = 0.02 m² module face.
  4. Divide: net area ÷ module face = 30 ÷ 0.02 = 1,500 bricks.
  5. Add waste: 1,500 × 1.05 = 1,575 bricks to order (or × 1.10 = 1,650 for a cut-heavy wall).
  6. Work out the mortar: wall volume (30 × 0.1025 = 3.075 m³) minus brick volume (1,500 × 0.19 × 0.09 × 0.09 = 2.3085 m³) = 0.7665 m³ wet mortar.
  7. Split the mortar: dry = 0.7665 × 1.33 = 1.0194 m³; cement = 1.0194 ÷ 7 × 1,440 = 209.7 kg (buy 5 × 50 kg bags); sand = 1.0194 × 6 ÷ 7 = 0.8738 m³.
  8. Price and deliver: 1,500 × $0.50 = $750.00 ($787.50 with waste); 1,500 ÷ 500 = 3 pallets; 1,500 × 2.5 kg = 3,750 kg.
Working in feet instead? Convert first: 10 m = 32.81 ft, 3 m = 9.84 ft, and the wall is 30 m² = 322.92 sq ft. The calculator converts feet to metres (× 0.3048) and does the same steps — or use our square footage calculator to get the wall area first, then divide by the module face.

Common Mistakes With Brick Calculations

1. Forgetting the mortar joint

The classic. Dividing 30 m² by the bare brick face (0.19 × 0.09 = 0.0171 m²) gives 1,754 bricks — 254 too many, about $127 wasted at $0.50 each. The joint is part of the wall: add 10 mm to the brick length and height first, then divide.

2. Not deducting doors and windows

A door and a window take 3.33 m² out of a 30 m² wall — 167 bricks, $83.50. On a house with many openings, skipping the deduction can over-order by hundreds of bricks. Measure every opening and deduct it.

3. Ordering the bare count with no waste

Bricks break in transit, get cut at corners and ends, and some arrive chipped. The bare 1,500 is the wall, not the order — order 1,575 (5% waste) on a straight wall and 1,650 (10%) on a cut-heavy one. Running short mid-wall costs a second delivery and a visible batch change.

4. Using the wrong brick size

Standard and Modular bricks look alike but need different counts: 2,102 vs 2,195 for the same 30 m² wall — a 93-brick difference. Check the size printed on the brick or the supplier's data sheet before you calculate, and never mix sizes in one wall.

5. Measuring the wall wrong

Measure length and height in the same unit, and measure the wall as built — not the plan's nominal size. A 10 cm error on a 10 m wall is 1% (15 bricks); a height measured to the eaves instead of the wall top can be far worse. Measure twice, on site.

6. Forgetting the mortar, cement and sand

Bricks are only part of the order. The lead wall also needs 0.77 m³ of wet mortar — 5 bags of cement and 0.87 m³ of sand. Ordering bricks without mortar stops the job on day one. Price the mortar, the delivery and the labour too — see the brick wall cost guide.

Benefits and Limitations

Correct joint mathsThe module face includes the 10 mm joint — the error most quick estimates make is designed out.
Bricks, mortar and cost togetherOne calculation gives the count, the mortar, the cement and sand, the cost, the pallets and the weight.
Five brick sizesStandard, Modular, Queen, King and Utility (BIA sizes) plus the 190 × 90 × 90 mm metric brick.

Benefits

  • Finds the brick count with and without waste, for any wall size, in metres or feet.
  • Deducts doors and windows by count and size.
  • Works out wet mortar (m³ and cu ft), dry mortar, cement bags and sand for a 1:6 mix.
  • Prices the job from your per-brick price, and works out pallets and total weight for delivery.
  • Shows a step-by-step table for every calculation, checkable by hand.
  • Responsive on phones, tablets and desktops — usable on site.

Limitations

  • An estimate for ordering, not a structural calculation — it does not check foundations, lintels, wall ties or local building codes.
  • Assumes a rectangular wall with a uniform joint; curved walls, arches, piers and pillars need extra allowance.
  • Mortar figures assume a 1:6 cement-sand mix and the standard 1.33 dry-volume factor — your mix or supplier may differ.
  • Brick weight (2.5 kg) and pallet size (500) are defaults — check your brick's data sheet and your supplier.
  • Prices are illustrative ($0.50 per brick) — enter your supplier's real price for a real budget.
AI Search & Featured Snippet Section

Quick Definitions

QuestionDirect Answer
How many bricks do I need for a 10x3 m wall?Exactly 1,500 bricks with 190 × 90 × 90 mm bricks and a 10 mm joint (module face 0.02 m²; 30 ÷ 0.02 = 1,500). Order 1,575 with 5% waste, or 1,650 with 10% waste.
How do you calculate the number of bricks for a wall?Divide the net wall area (length × height, minus doors and windows) by the brick module face — (brick length + joint) × (brick height + joint). Then add 5–10% for waste.
How much mortar do I need for 1,500 bricks?0.77 m³ of wet mortar (27.1 cu ft) for a 10 × 3 m single-brick wall. That is 209.7 kg of cement (5 × 50 kg bags) and 0.87 m³ of sand with a 1:6 mix.
How many bricks are in a pallet?About 500 bricks per standard pallet, so a 1,500-brick wall is 3 pallets. Pallet sizes vary by supplier and brick type — confirm before ordering.
What size is a standard brick?Standard 203 × 92 × 57 mm; Modular 194 × 92 × 57 mm; Queen 194 × 92 × 70 mm; King 244 × 92 × 70 mm; Utility 295 × 92 × 102 mm (Brick Industry Association). The lead example uses 190 × 90 × 90 mm.
What is the mortar joint in brickwork?The layer of mortar between bricks, usually 10 mm thick. It is added to the brick's length and height to get the module face — the area one brick occupies in the finished wall.
How much does a brick wall cost?At $0.50 per brick, a 10 × 3 m wall costs $750.00 for bricks, or $787.50 with 5% waste — plus mortar, delivery and labour. See the brick wall cost guide for the full breakdown.
What is waste percentage in brickwork?Extra bricks ordered for breakages, cuts and chipped units: 5% for a straight wall, 10% for walls with many cuts, corners or curves. Order the with-waste number.
FAQ

Frequently Asked Questions

How many bricks do I need for a 10x3 m wall?

Exactly 1,500 bricks — 1,575 with 5% waste. A 10 × 3 m wall is 30 m². With 190 × 90 × 90 mm bricks and a 10 mm mortar joint, each brick occupies a 200 × 100 mm module face (0.02 m²), so 30 ÷ 0.02 = 1,500. Use the free brick calculator above for any other wall size or brick size.

How do you calculate the number of bricks for a wall?

Divide the net wall area by the brick module face, then add waste. Net area is length × height minus doors and windows. The module face is (brick length + mortar joint) × (brick height + mortar joint). For the lead wall: 30 m² ÷ 0.02 m² = 1,500 bricks, then × 1.05 = 1,575 to order.

How much mortar do I need for 1,500 bricks?

0.77 m³ of wet mortar (27.1 cu ft). Wall volume 3.075 m³ minus brick volume 2.3085 m³ = 0.7665 m³. With a 1:6 cement-sand mix that is 209.7 kg of cement — buy 5 × 50 kg bags — and 0.87 m³ of sand.

How many bricks are in a pallet?

About 500 bricks per standard pallet, so 1,500 bricks is 3 pallets. Pallet sizes vary by supplier, brick type and region — some suppliers pack 400 or 600. Confirm the pallet size with your supplier before you order, and check delivery access for the weight (3,750 kg for 1,500 bricks).

What size is a standard brick?

Standard is 203 × 92 × 57 mm; Modular 194 × 92 × 57 mm; Queen 194 × 92 × 70 mm; King 244 × 92 × 70 mm; Utility 295 × 92 × 102 mm (Brick Industry Association). Bigger bricks mean fewer per wall — a King brick needs only 1,476 for a 30 m² wall, a Modular needs 2,195. The lead example on this page uses a 190 × 90 × 90 mm metric brick.

How much does it cost to build a brick wall?

At $0.50 per brick, a 10 × 3 m wall costs $750.00 for the bricks, or $787.50 with 5% waste. Add mortar (5 bags of cement and 0.87 m³ of sand), delivery and labour — the full breakdown is in our brick wall cost guide.

Internal Linking

Related Math Tools

Square Footage CalculatorFind the wall area in square feet first — then divide by the brick module face to get the count.
Cubic Yard CalculatorConvert the mortar and sand volumes (0.77 m³, 0.87 m³) into cubic yards for US suppliers.
Volume CalculatorWall volume is length × height × thickness — 3.075 m³ on the lead wall. Check it here.
How Many Bricks Do I Need?The full guide to the brick formula — sizes, joints, openings and waste, with worked examples.
Brick Wall Cost CalculatorPrice the whole job: bricks, mortar, cement, sand, delivery and labour, with a worked budget.
Construction CalculatorsBrowse the whole construction collection — square footage, cubic yards, volume and brick — in Calcrio's Construction Calculators hub.
Methodology

Brick Calculator Methodology

This calculator derives every answer from the wall size and brick size you enter, using exact decimal arithmetic in the browser and rounding once, to whole bricks or two decimals, at the end.

Net area = Length × Height − Σ(Door W × Door H) − Σ(Window W × Window H)
Module face = (Brick L + Joint) × (Brick H + Joint)  ·  Bricks = Net area ÷ Module face (× wythes)
Bricks to order = Bricks × (1 + Waste%)  ·  Cost = Bricks to order × Price
Wall volume = Net area × Thickness  ·  Brick volume = Bricks × Brick L × Brick D × Brick H
Wet mortar = Wall volume − Brick volume  ·  Dry mortar = Wet × 1.33  ·  Cement = Dry ÷ 7 × 1,440 kg/m³  ·  Sand = Dry × 6 ÷ 7
Weight = Bricks × Brick weight  ·  Pallets = Bricks ÷ Pallet size  ·  1 m³ = 35.3147 cu ft  ·  1 ft = 0.3048 m

All lengths are converted to metres first: feet × 0.3048; brick dimensions are in millimetres ÷ 1,000. The brick count is the exact division rounded to whole bricks; the with-waste count applies the waste percentage to the exact count, then rounds. Mortar is wall volume minus brick volume, using the base (no-waste) brick count — the mortar fills the wall as built, and the waste bricks are spares. Dry mortar uses the standard estimating factor of 1.33; a 1:6 cement-sand mix splits dry mortar into 1 part cement and 6 parts sand by volume, with cement at 1,440 kg/m³ and 50 kg bags (bags rounded up to whole bags). Weight and pallets use the base brick count. For the lead example, a 10 × 3 m wall, 190 × 90 × 90 mm bricks, 10 mm joint, 102.5 mm single-brick thickness: net area 30 m²; module face 0.02 m²; 1,500 bricks; 1,575 with 5% waste; wall volume 3.075 m³; brick volume 2.3085 m³; wet mortar 0.7665 m³ (27.1 cu ft); dry mortar 1.0194 m³; cement 209.7 kg (4.19 bags — buy 5); sand 0.8738 m³; cost $750.00 ($787.50 with waste); weight 3,750 kg; 3 pallets. The calculator stores nothing and sends nothing anywhere. It is an estimate for ordering — confirm quantities with your supplier and builder, and check local building codes before you build.

Trust note: Every answer carries a built-in check — bricks × module face must equal the net wall area (1,500 × 0.02 = 30 m²), and brick volume + mortar volume must equal the wall volume (2.3085 + 0.7665 = 3.075 m³) — and the landmark answers are fixed points: the lead wall is 1,500 bricks (1,575 with 5% waste); the garden wall is 915 (960 with waste); the door-and-window wall is 1,333 (1,400 with waste). If a result disagrees with its landmark, a measurement was entered wrong — most often the joint left out, or feet entered as metres.
References

Brick References

How Many Bricks Does Your Wall Need?

Measure your wall above — a 10 × 3 m wall needs exactly 1,500 bricks, 1,575 with 5% waste, plus 0.77 m³ of mortar — and see your brick count, mortar, cement, sand, cost, pallets and weight, with every step shown. Count the joint, deduct the openings, add the waste — then order.

Use Brick Calculator
Scroll to Top