To calculate body fat percentage, measure your waist, neck and height in centimetres (plus hip for women), then use the US Navy formula. For example, a man 178 cm tall with a 91 cm waist and a 41 cm neck is 18.7% body fat — 17.0 kg of fat and 74.0 kg of lean mass at 91 kg.
Body weight alone cannot tell you how much of you is fat and how much is muscle. Two people can both weigh 91 kg — one at 18.7% body fat, the other at 30% — and their health and fitness pictures are completely different. Body fat percentage is the number trainers, doctors and the military actually use, and the US Navy method is the simplest way to find it with nothing more than a tape measure.
What Is Body Fat Percentage?
Body fat percentage is the share of your total body weight that is fat tissue, expressed as a percentage. The rest is lean mass: muscle, bone, water and organs. If you weigh 91 kg and you are 18.7% body fat, you carry 17.0 kg of fat and 74.0 kg of lean mass — and those two numbers add back to 91 kg, which is a built-in check on the maths.
Body fat percentage matters because fat and lean mass do different jobs. Fat stores energy and cushions organs, but too much of it — especially around the waist — is linked to heart disease, type 2 diabetes and other health problems. Lean mass is what moves you, burns calories and keeps you strong. A scale tells you the total; only body fat percentage tells you the split. If you would rather skip the hand calculation, a body fat calculator applies the same steps for you, but understanding the steps first means you can check any result it gives you.
What Is the US Navy Method for Body Fat?
The US Navy method estimates body fat percentage from a few tape measurements, using formulas developed from body-density research by Hodgdon and Beckett at the Naval Health Research Center. The Navy needed a quick field test — underwater weighing was accurate but impractical on a ship — so researchers measured the body density of Navy personnel by hydrostatic weighing, then looked for tape measurements that predicted it.
Waist minus neck turned out to be the best single predictor for men, and waist plus hip minus neck for women. A big waist with a thin neck means more abdominal fat; the logarithm in the formula is there because the relationship between circumferences and density is curved, not straight. The method is still used by the US military today, and it is usually within about 3–4 percentage points of a DEXA scan or hydrostatic weighing for most people.
What Is the Body Fat Percentage Formula?
The Navy formula comes in two versions, one for men and one for women, and both take measurements in centimetres. That unit rule is the single most important fact in this guide.
- Men: body fat % = 495 ÷ (1.0324 − 0.19077 × log10(waist − neck) + 0.15456 × log10(height)) − 450
- Women: body fat % = 495 ÷ (1.29579 − 0.35004 × log10(waist + hip − neck) + 0.22100 × log10(height)) − 450
- Fat mass = weight × body fat % ÷ 100
- Lean mass = weight − fat mass
The formula works in two stages. First it estimates body density from your measurements — the bracketed part with the logarithms. Then it converts that density into a body-fat percentage with the 495 ÷ density − 450 transform. Denser bodies have less fat, so a higher density gives a lower percentage.
How Do I Measure My Waist, Neck and Hip Correctly?
The formula is only as good as the measurements, and a 2 cm error in the waist moves the result by about 1 percentage point. Measure carefully, the same way every time.
- Waist: stand relaxed and measure at the navel (belly button), with the tape level all the way round. Breathe out normally and read the tape — do not suck in, and do not pull the tape tight enough to dent the skin.
- Neck: measure just below the Adam’s apple, with the tape level and snug. Keep your head level and do not tense your neck.
- Hip (women only): measure at the widest point around the buttocks, with your feet together and the tape level.
- Height: stand straight against a wall, without shoes, and measure to the top of your head.
- Take each measurement twice and use the average. If the two readings differ by more than 1 cm, take a third.
- Measure in the morning, before eating, for the most consistent readings over time.
Use a flexible cloth or plastic tape, not a metal one, and keep it snug — touching the skin all the way round without indenting it. A loose tape sags and overstates the waist; a tight one compresses the skin and understates it.
How Do I Calculate Body Fat Percentage Step by Step?
The lead example uses a man 178 cm tall, with a 91 cm waist and a 41 cm neck, weighing 91 kg.
- Subtract neck from waist: 91 − 41 = 50 cm. (Women: waist + hip − neck.)
- Take log10 of that number and of your height: log10(50) = 1.6990; log10(178) = 2.2504. Any scientific calculator has a log button — make sure it is log base 10, not natural log.
- Find body density: 1.0324 − 0.19077 × 1.6990 + 0.15456 × 2.2504 = 1.0561.
- Convert density to body fat %: 495 ÷ 1.0561 − 450 = 18.7%.
- Find fat mass: 91 kg × 18.7% = 17.0 kg.
- Find lean mass: 91 − 17.0 = 74.0 kg.
The same six steps work for anyone, provided the measurements are in centimetres. A body fat calculator follows exactly these steps, so it is a useful way to check your own working.
How Do I Calculate Body Fat Percentage for a Woman?
The women’s formula adds the hip measurement, because fat is distributed differently in women’s bodies and the waist alone does not capture it. The example uses a woman 165 cm tall, with a 71 cm waist, a 97 cm hip and a 32 cm neck, weighing 65 kg.
Waist + hip − neck = 71 + 97 − 32 = 136 cm. log10(136) = 2.1335; log10(165) = 2.2175. Density = 1.29579 − 0.35004 × 2.1335 + 0.22100 × 2.2175 = 1.0390. Body fat % = 495 ÷ 1.0390 − 450 = 26.4%. Fat mass = 65 × 26.4% = 17.2 kg. Lean mass = 65 − 17.2 = 47.8 kg.
Her body fat percentage of 26.4% sits in the Average range for women (25–31% per the American Council on Exercise). The full ranges for men and women are in our companion guide on the body fat percentage chart.
What If I Measure in Inches and Pounds?
Convert first, then follow the same steps — never feed inch values into the formula as they stand. The conversions are 1 inch = 2.54 cm and 1 lb = 0.4536 kg (1 kg = 2.20462 lb).
The lead man in imperial units: height 178 cm = 70.1 in, waist 91 cm = 35.8 in, neck 41 cm = 16.1 in, weight 91 kg = 200.6 lb. Multiply each inch figure by 2.54 to get back to centimetres (70.1 × 2.54 = 178.1 cm) and follow the same six steps to reach 18.7%.
Feeding inches straight into the formula is the most common error in body-fat maths, and the result is not a small rounding difference — it is impossible. The lead man’s measurements as inches give 12.3% instead of 18.7%, and the example woman’s give 3.6% instead of 26.4%. A woman at 3.6% body fat would be below essential fat (10–13%), which cannot sustain life. If a calculator ever gives you a number below essential fat, check the units first.
How Do I Calculate Body Fat Percentage From BMI?
If you have no tape measure, the Deurenberg formula estimates body fat from BMI, age and sex: body fat % = 1.20 × BMI + 0.23 × age − 10.8 × sex − 5.4, where sex is 1 for men and 0 for women.
For the lead man: BMI = 91 ÷ 1.78² = 28.7. At age 35, body fat % = 1.20 × 28.7 + 0.23 × 35 − 10.8 × 1 − 5.4 = 34.5 + 8.1 − 10.8 − 5.4 = 26.3%. That is 7.6 points higher than the Navy method’s 18.7% — and the gap is the muscle the BMI method mistakes for fat. BMI only knows total weight; it cannot tell whether 91 kg is muscle or fat. For the example woman, whose BMI is 23.9, the gap is smaller: 30.2% by BMI at age 30 against 26.4% by the Navy method, a 3.7-point difference.
Use the BMI method only as a rough check. Use the Navy method whenever you can measure — and find your BMI itself with our BMI calculator if you need it.
What Counts as a Healthy Body Fat Percentage?
The American Council on Exercise (ACE) publishes the most widely cited body-fat categories. They are population ranges, not a medical diagnosis — where you sit in them depends on age, training and genetics too.
| Category (ACE) | Men | Women |
|---|---|---|
| Essential fat | 2–5% | 10–13% |
| Athletes | 6–13% | 14–20% |
| Fitness | 14–17% | 21–24% |
| Average | 18–24% | 25–31% |
| Obese | 25%+ | 32%+ |
The lead man at 18.7% is in the Average range for men; the example woman at 26.4% is in the Average range for women. A second man in our worked examples — 180 cm, waist 85 cm, neck 40 cm, 80 kg — comes out at 14.5% body fat, 11.6 kg of fat and 68.4 kg of lean mass, which is the Fitness range. The full chart, with what each range means and what to do about it, is in our body fat percentage chart guide.
What Mistakes Do People Make When Calculating Body Fat?
Most wrong body-fat figures come from a few repeatable mistakes. The first is feeding inches into a centimetre formula, covered above: it gives 12.3% for the lead man and 3.6% for the example woman, both impossible.
The second is measuring the waist in the wrong place. The Navy waist is at the navel, not at the narrowest point and not at the belt line. Measuring at the narrowest point can shave 3–5 cm off the waist, which drops the result by roughly 2 percentage points — a flattering error, but an error.
The third is pulling the tape tight or leaving it loose, and the fourth is forgetting the hip measurement for women — without it, the women’s formula has no way to account for lower-body fat and the result is meaningless.
The fifth is treating the BMI estimate as a measurement. The Deurenberg estimate reads 26.3% for the lead man while the Navy method reads 18.7%. Never average the two methods: pick the Navy result when you have measurements.
The sixth is reading the percentage as a verdict. Body fat percentage is an estimate with a ±3–4 point error band. Track the trend over weeks with the same tape, same place and same time of day — the change is more reliable than any single number.
How Accurate Is the Navy Method?
The Navy method is usually within about 3–4 percentage points of DEXA or hydrostatic weighing for most people. It is less accurate for very muscular people (it can read high, because a thick neck from muscle shrinks the waist-minus-neck gap) and for very lean people, and it was fitted on Navy personnel — mostly young, fit adults — so it fits that population best.
That error band is worth keeping in mind when you read your result. A reading of 18.7% most likely means your true body fat is somewhere around 15–22%. What the method is very good at is tracking change: if you measure the same way every two weeks and the number falls from 18.7% to 17.5%, that change is real even if the absolute number is approximate. For a clinical number — before surgery, or for a medical diagnosis — ask a health professional for a DEXA scan.
Frequently Asked Questions
How do I calculate my body fat percentage?
Measure your waist, neck and height in centimetres (plus hip for women), then use the US Navy formula. For a man: body fat % = 495 ÷ (1.0324 − 0.19077 × log10(waist − neck) + 0.15456 × log10(height)) − 450. A man 178 cm tall, waist 91 cm, neck 41 cm, 91 kg: 18.7% body fat, 17.0 kg fat, 74.0 kg lean.
Why must the Navy formula use centimetres?
The formulas were fitted with centimetre measurements. Feeding inch values straight in gives an impossible answer — 12.3% for the lead man instead of 18.7%, and 3.6% for the example woman instead of 26.4%. Convert inches to centimetres (× 2.54) first; the body fat calculator does it internally.
What is a healthy body fat percentage?
Per the American Council on Exercise (ACE), average is 18–24% for men and 25–31% for women; fitness is 14–17% for men and 21–24% for women; athletes are 6–13% for men and 14–20% for women. These are population categories, not a medical diagnosis.
How is body fat percentage different from BMI?
BMI only uses height and weight, so it cannot tell muscle from fat — the lead man has a BMI of 28.7 but only 18.7% body fat. Body fat percentage measures the actual fat share. Use BMI as a rough screen and the Navy method when you want the real split.
How do I measure my waist for the Navy method?
At the navel, with the tape level and snug but not tight, after breathing out normally — do not suck in. Neck just below the Adam’s apple; hip at the widest point around the buttocks. Take each measurement twice and use the average.
Is a body fat calculator a medical diagnosis?
No. The Navy method is an estimate, usually within about 3–4 points of DEXA or hydrostatic weighing, and it is not a medical measurement. If you need a clinical number, ask a health professional.
