Body Fat Calculator — US Navy Method, Fat Mass & Lean Mass
A man 178 cm tall with a 91 cm waist and a 41 cm neck, weighing 91 kg, is 18.7% body fat — 17.0 kg of fat and 74.0 kg of lean mass. This free body fat calculator finds your body fat percentage, fat mass and lean mass with the US Navy method (waist, neck and height — plus hip for women) or a BMI-based estimate, in centimetres or inches, kilograms or pounds — with every step shown, so you can check it by hand.
Body Fat Calculator
Enter your measurements and the calculator finds your body fat percentage, fat mass and lean mass. Calculations run in your browser — nothing is sent anywhere. The Navy formulas take centimetres, so if you enter inches the calculator converts them (× 2.54) before doing the maths. Part of our Health Calculators collection.
BMI-based estimate (Deurenberg et al. 1991): body fat % = 1.20 × BMI + 0.23 × age − 10.8 × sex − 5.4. It only knows your height, weight, age and sex — it cannot tell muscle from fat, so it reads high for muscular people.
| Step | Calculation | Amount |
|---|
What Is a Body Fat Calculator?
A body fat calculator turns a tape measure into the number that actually matters for health and fitness: not how much you weigh, but how much of that weight is fat. Give it a man 178 cm tall, with a 91 cm waist and a 41 cm neck, weighing 91 kg, and it finds 18.7% body fat — 17.0 kg of fat mass and 74.0 kg of lean mass. It uses the US Navy method, the formula the US Navy developed from body-density research (Hodgdon & Beckett): waist and neck measurements stand in for body density, and the formula converts that density into a body-fat percentage. A second mode estimates body fat from BMI, age and sex (Deurenberg et al. 1991) for when you have no tape measure. Every answer shows the step-by-step working, so you can check it by hand. This page is part of Calcrio's Health Calculators collection.
An estimate, not a diagnosis: the Navy method is usually within about 3–4 percentage points of a DEXA or hydrostatic-weighing result for most people, but it is not a medical measurement. If you need a clinical number, ask a health professional.
How to Use the Body Fat Calculator
Two methods, one tape measure — with the full working shown underneath.
- Choose the US Navy Method tab (the default) — or the BMI-Based Estimate tab if you have no tape measure.
- Pick Male or Female. Women also enter a hip measurement.
- Enter your height, neck and waist — in centimetres, or inches (the calculator converts × 2.54).
- Enter your weight in kilograms or pounds.
- Select Calculate to see your body fat %, fat mass, lean mass and ACE category, with the step table underneath.
Remember what the number is: an estimate. Two people with the same waist can carry fat differently, and the formula was fitted on Navy personnel — very muscular or very lean people can be off by more. Use it to track change over time, not as a medical verdict.
What Is a Body Fat Calculator?
A body fat calculator estimates the share of your body weight that is fat tissue, as opposed to lean mass — muscle, bone, water and organs. Weight alone cannot tell you that: two people can both weigh 91 kg, one at 18.7% body fat and the other at 30%, and their health and fitness pictures are completely different. Body fat percentage is the number trainers, doctors and the military actually use to judge body composition.
All measurements in the Navy formulas are in centimetres. That is the single most important fact on this page — and the one most online calculators get wrong. The formulas were fitted with centimetre measurements; feeding inches straight in gives an impossible answer (12.3% for the lead man instead of 18.7%, and 3.6% for the example woman instead of 26.4%). This calculator converts inches to centimetres (× 2.54) before applying the formula.
Why Waist and Neck? The Idea Behind the Navy Method
The Navy method is a shortcut for body density. Denser bodies — more muscle and bone, less fat — float lower in water; the original research measured body density by underwater weighing, then looked for tape measurements that predicted it. Waist minus neck turned out to be the best single predictor for men (a big waist with a thin neck means more abdominal fat), and waist plus hip minus neck for women. The logarithm in the formula is there because the relationship between circumferences and density is curved, not straight.
Body Fat Percentage Chart: Healthy Ranges (ACE)
The American Council on Exercise (ACE) publishes the most widely cited body-fat categories. They are population ranges, not a medical diagnosis — where you sit in them depends on age, training and genetics too.
| Category (ACE) | Men | Women |
|---|---|---|
| Essential fat | 2–5% | 10–13% |
| Athletes | 6–13% | 14–20% |
| Fitness | 14–17% | 21–24% |
| Average | 18–24% | 25–31% |
| Obese | 25%+ | 32%+ |
The lead man at 18.7% sits in the Average range for men (18–24%); the example woman at 26.4% sits in the Average range for women (25–31%). The fit man in the worked examples, at 14.5%, is in the Fitness range. Our companion guide on the body fat percentage chart explains each range in full — what it means, who it fits, and what to do about it.
US Navy vs BMI-Based: Two Estimates, One Body
The BMI-based estimate (Deurenberg et al. 1991) needs only height, weight, age and sex — no tape measure. But BMI only knows total weight: it cannot tell whether 91 kg is muscle or fat. The lead man has a BMI of 28.7, which the BMI method reads as 26.3% body fat at age 35, while the Navy method — which actually measures his waist — gives 18.7%. The 7.6-point gap is the muscle the BMI method mistakes for fat. Use the Navy method whenever you can measure; use the BMI method only as a rough check. Our BMI calculator and BMR calculator cover the two numbers this method builds on.
Body Fat Calculator Worked Examples
Every row below is computed exactly from the formulas above — hand-verified in Python — so you can check each one by hand. All Navy measurements are in centimetres.
| Scenario | Body fat % | Fat mass | Lean mass | ACE category |
|---|---|---|---|---|
| Man, 178 cm, waist 91, neck 41, 91 kg (lead) | 18.7% | 17.0 kg | 74.0 kg | Average |
| Woman, 165 cm, waist 71, hip 97, neck 32, 65 kg | 26.4% | 17.2 kg | 47.8 kg | Average |
| Man, 180 cm, waist 85, neck 40, 80 kg | 14.5% | 11.6 kg | 68.4 kg | Fitness |
| Woman, 160 cm, waist 68, hip 92, neck 30, 58 kg | 24.6% | 14.3 kg | 43.7 kg | Fitness |
| Lead man, BMI method, age 35 (BMI 28.7) | 26.3% | 23.9 kg | 67.1 kg | Obese* |
| Woman, BMI method, age 30 (BMI 23.9) | 30.2% | 19.6 kg | 45.4 kg | Average |
*The BMI method puts the lead man in the "Obese" category at 26.3% — the Navy method, which measures his waist, puts him at 18.7% (Average). The label follows the number; the number follows the method. That is the BMI method's weakness, not his body.
The Woman's Example, Step by Step
A woman 165 cm tall, waist 71 cm, hip 97 cm, neck 32 cm, weight 65 kg. Waist + hip − neck = 71 + 97 − 32 = 136 cm. log10(136) = 2.1335; log10(165) = 2.2175. Density = 1.29579 − 0.35004 × 2.1335 + 0.22100 × 2.2175 = 1.0390. Body fat % = 495 ÷ 1.0390 − 450 = 26.4%. Fat mass = 65 × 26.4% = 17.2 kg. Lean mass = 65 − 17.2 = 47.8 kg.
Why the BMI Method Reads Higher
For the lead man, the BMI method gives 26.3% against the Navy method's 18.7% — a 7.6-point gap. The arithmetic: BMI = 91 ÷ 1.78² = 28.7; then 1.20 × 28.7 + 0.23 × 35 − 10.8 × 1 − 5.4 = 34.5 + 8.1 − 10.8 − 5.4 = 26.3%. The formula assumes a BMI of 28.7 means a lot of fat. For a muscular man it does not — his extra weight is lean mass, which the tape measure sees (a 91 cm waist on a 178 cm frame) and the BMI formula cannot. For the example woman the gap is smaller, 3.7 points (30.2% vs 26.4%), because her BMI of 23.9 is in the normal range and the formula's assumption holds better.
How to Calculate Body Fat Percentage, Step by Step
Follow this recipe for the lead example — a man 178 cm tall, waist 91 cm, neck 41 cm, weight 91 kg.
- Measure your waist at the navel, level and snug, after breathing out normally: 91 cm.
- Measure your neck just below the Adam's apple: 41 cm.
- Subtract: waist − neck = 91 − 41 = 50 cm. (Women: waist + hip − neck.)
- Take log10 of that number and of your height: log10(50) = 1.6990; log10(178) = 2.2504.
- Find body density: 1.0324 − 0.19077 × 1.6990 + 0.15456 × 2.2504 = 1.0561.
- Convert density to body fat %: 495 ÷ 1.0561 − 450 = 18.7%.
- Split your weight: fat mass = 91 × 18.7% = 17.0 kg; lean mass = 91 − 17.0 = 74.0 kg.
Common Mistakes With Body Fat Percentage
1. Feeding inches into a centimetre formula
The classic, and the one most online calculators silently make. The Navy formulas were fitted in centimetres. Put the lead man's measurements in as inches (35.8, 16.1, 70.1) without converting and you get 12.3% — below the Fitness range for a man carrying 17 kg of fat. For the example woman it is worse: 3.6%, below essential fat. Always convert inches × 2.54 first — this calculator does it for you.
2. Measuring the waist in the wrong place
The Navy waist is at the navel, not at the narrowest point and not at the belt line. Measuring at the narrowest point can shave 3–5 cm off the waist, which drops the result by roughly 2 percentage points — a flattering error, but an error. Measure at the navel, tape level, after breathing out, without sucking in.
3. Pulling the tape tight (or leaving it loose)
A tape pulled tight compresses the skin and understates the waist; a loose tape sags and overstates it. Snug means the tape touches the skin all the way round without indenting it. Take each measurement twice and use the average.
4. Forgetting the hip measurement for women
The women's formula needs waist + hip − neck. Leave the hip out and the formula has no way to account for lower-body fat — the result is meaningless. If you are a woman using this calculator, the hip field is not optional.
5. Treating the BMI estimate as a measurement
The Deurenberg estimate reads 26.3% for the lead man while the Navy method reads 18.7%. That 7.6-point gap is not a rounding error — it is the BMI method mistaking muscle for fat. Never use a BMI-based number to judge a muscular person, and never average the two methods: pick the Navy result when you have measurements.
6. Reading the percentage as a verdict
Body fat percentage is an estimate with a ±3–4 point error band, and healthy ranges are population categories, not personal targets. A single reading of 18.7% does not diagnose anything. Track the trend over weeks with the same tape, same place, same time of day — the change is more reliable than any single number.
Benefits and Limitations
Benefits
- Finds body fat %, fat mass, lean mass and your ACE category in one calculation.
- US Navy method for men and women, with the hip measurement for women.
- Works in centimetres or inches, kilograms or pounds — conversions done for you.
- BMI-based estimate for when you have no tape measure.
- Shows a step-by-step table for every calculation, checkable by hand.
- Responsive on phones, tablets and desktops.
Limitations
- An estimate, not a measurement: usually within about 3–4 points of DEXA or hydrostatic weighing, less accurate for very muscular or very lean people.
- Needs careful measuring — a 2 cm waist error moves the result by about 1 point.
- The BMI-based estimate cannot tell muscle from fat and reads high for muscular people.
- Not a medical diagnosis — talk to a health professional for clinical decisions.
- Body fat percentage does not show where fat is stored; waist circumference itself is also a health signal.
Quick Definitions
| Question | Direct Answer |
|---|---|
| How do I calculate my body fat percentage? | Use the US Navy method: measure waist, neck and height (plus hip for women) in centimetres, then apply the Navy formula. A man 178 cm tall, waist 91 cm, neck 41 cm, 91 kg: 18.7% body fat, 17.0 kg fat, 74.0 kg lean. |
| What is a healthy body fat percentage? | Per the American Council on Exercise (ACE): average is 18–24% for men and 25–31% for women; fitness is 14–17% for men and 21–24% for women; athletes are 6–13% for men and 14–20% for women. |
| What is the US Navy body fat method? | A formula (Hodgdon & Beckett) that estimates body fat % from waist, neck and height (plus hip for women), via body density. Measurements must be in centimetres; inches are converted × 2.54 first. |
| What is fat mass vs lean mass? | Fat mass is the weight of your body fat (17.0 kg for the lead man); lean mass is everything else — muscle, bone, water, organs (74.0 kg). Together they add up to your total weight (91 kg). |
| Why does the BMI method give a different number? | The Deurenberg BMI estimate only knows height, weight, age and sex — it cannot tell muscle from fat. The lead man (BMI 28.7) gets 26.3% by BMI but 18.7% by the Navy method, which measures his waist. |
| How accurate is a body fat calculator? | The Navy method is usually within about 3–4 percentage points of DEXA or hydrostatic weighing for most people. It is an estimate, not a medical diagnosis, and less accurate for very muscular or very lean people. |
| Where do I measure my waist for body fat? | At the navel, tape level and snug but not tight, after breathing out normally — do not suck in. Neck just below the Adam's apple; hip at the widest point around the buttocks. |
| What is essential body fat? | The minimum fat the body needs to function: 2–5% for men and 10–13% for women (ACE). Below that, health suffers — it is a floor, not a target. |
Frequently Asked Questions
How do I calculate my body fat percentage?
Measure your waist, neck and height, then use the US Navy formula. All measurements in centimetres: for men, body fat % = 495 ÷ (1.0324 − 0.19077 × log10(waist − neck) + 0.15456 × log10(height)) − 450. For example, a man 178 cm tall with a 91 cm waist and a 41 cm neck is 18.7% body fat — 17.0 kg of fat and 74.0 kg of lean mass at 91 kg. Or use the free body fat calculator above and it does the logs for you.
What is a healthy body fat percentage?
Per the American Council on Exercise (ACE), average is 18–24% for men and 25–31% for women. Fitness is 14–17% for men and 21–24% for women; athletes are 6–13% for men and 14–20% for women; essential fat is 2–5% for men and 10–13% for women. These are population categories, not a medical diagnosis — age, training and genetics all matter.
Why is the US Navy method in centimetres?
The formulas were fitted with centimetre measurements. Feeding inch values straight into the formula gives an impossible answer — 12.3% for the lead man instead of 18.7%, and 3.6% for the example woman instead of 26.4%. Convert inches to centimetres (× 2.54) first; this calculator does it internally.
How accurate is the US Navy body fat method?
Usually within about 3–4 percentage points of DEXA or hydrostatic weighing for most people. It is an estimate based on circumferences, not a direct measurement — very muscular or very lean people can be off by more, and it is not a medical diagnosis. Measure carefully and track the trend over time rather than trusting any single reading.
Why does the BMI-based estimate differ from the Navy result?
The BMI-based (Deurenberg) estimate only knows your height, weight, age and sex — it cannot tell muscle from fat. The lead man has a BMI of 28.7, so the BMI method guesses 26.3% body fat, while the Navy method, which measures his actual waist, gives 18.7%. The 7.6-point gap is the muscle the BMI method mistakes for fat. Use the Navy method whenever you can measure.
How do I measure my waist for the Navy method?
Measure at the navel, level and snug but not tight, after breathing out normally — do not suck in. Measure your neck just below the Adam's apple, and for women the hip at the widest point around the buttocks. Take each measurement twice and use the average; a 2 cm waist error moves the result by about 1 point.
Related Math Tools
Body Fat Calculator Methodology
This calculator derives every answer from the measurements you enter, using exact decimal arithmetic in the browser and rounding once, to one decimal place, at the end.
All Navy measurements are converted to centimetres first: inches × 2.54; weight is converted to kilograms for the BMI calculation (pounds ÷ 2.20462) and shown back in the unit you picked. The density intermediate is computed with log base 10, then converted to a body-fat percentage with the 495/density − 450 transform. Fat mass is weight times the percentage; lean mass is the remainder, so the two always add back to your weight — a built-in check. Categories follow the American Council on Exercise (ACE) ranges: men essential 2–5%, athletes 6–13%, fitness 14–17%, average 18–24%, obese 25%+; women essential 10–13%, athletes 14–20%, fitness 21–24%, average 25–31%, obese 32%+. For the lead example, a man 178 cm tall, waist 91 cm, neck 41 cm, 91 kg: waist − neck = 50 cm; density = 1.0561; body fat 18.7%; fat mass 17.0 kg; lean mass 74.0 kg. The calculator stores nothing and sends nothing anywhere. It is an estimate, not a medical diagnosis.
Body Fat References
- American Council on Exercise (ACE) — Percent Body Fat Calculator and body-fat percentage categories
- Hodgdon, J. A., & Beckett, M. B. (1984). Prediction of percent body fat for U.S. Navy men and women from body circumferences. Naval Health Research Center Report No. 84-11.
- U.S. Navy — Body Composition Assessment (Navy method origin; circumference-based body-fat estimation)
- Deurenberg, P., Weststrate, J. A., & Seidell, J. C. (1991). Body mass index as a measure of body fatness: age- and sex-specific prediction formulas. British Journal of Nutrition, 65(2), 105–114.
- Centers for Disease Control and Prevention (CDC) — About Adult BMI
How Much of You Is Fat — and How Much Is Lean?
Measure your waist, neck and height above — a man 178 cm tall with a 91 cm waist and a 41 cm neck is 18.7% body fat, 17.0 kg of fat and 74.0 kg of lean mass — and see your body fat percentage, fat mass and lean mass, with every step shown. Remember: centimetres in, truth out.
Use Body Fat Calculator