A good CPM depends on where you advertise. As a rough 2026 guide, a good CPM is $2–$5 on Google Display, $5–$15 on Meta and TikTok, $8–$15 on YouTube, and $25–$50+ on LinkedIn. A $7.50 CPM can be excellent on Facebook and terrible on Google Display — so judge your number against your own channel’s range, never against a single universal figure.
That is the honest answer, and it is also the reason most “average CPM” articles mislead. They quote one number as if a thousand impressions cost the same everywhere. They do not. A thousand impressions on LinkedIn costs roughly ten times a thousand impressions on Google Display, because the audiences, the intent, and the competition are completely different. This guide gives you the 2026 ranges by platform and industry, shows you how to work out whether your CPM is good, and explains what to do when it is not.
What Does “Good CPM” Actually Mean?
A good CPM is a CPM that buys attention cheaply enough, from the right people, to make your campaign profitable. Three things decide it:
- The channel. Each platform runs its own auction with its own inventory and competition.
- The audience. Narrow, high-value audiences cost more per thousand than broad ones.
- The outcome. A cheap CPM that produces no clicks or sales is not good; it is cheap for a reason.
That is why the first rule of benchmarking is: compare your CPM with your own past CPMs on the same platform first, and with published ranges second. Your own history is the benchmark that matters most.
2026 CPM Benchmarks by Platform
The ranges below are planning ranges reported by 2026 benchmark roundups (CalculateCPM, CPMKit, Valuefy, AdLibrary). They are directional guides, not guarantees — your actual CPM varies with targeting, creative, seasonality, and auction pressure.
| Platform | Typical CPM range (2026) | Best for |
|---|---|---|
| Google Display Network | $2–$5 | Remarketing, broad awareness |
| Programmatic display | $1–$4 | Reach extension, retargeting |
| $4–$6 | Visual discovery, shopping | |
| TikTok | $5–$13 | Short video, younger audiences |
| Facebook / Meta | $6–$14 | Social targeting, direct response |
| $7–$15 | Visual brands, lifestyle | |
| YouTube | $8–$15 | Video views, brand recall |
| $25–$50+ | B2B lead generation | |
| Connected TV | $30+ | Premium video reach |
Two patterns jump out. First, Google Display is the cheapest major channel because its inventory is enormous. Second, LinkedIn is the most expensive because its audience — professionals filtered by job title, company, and seniority — is scarce and valuable to B2B advertisers. Neither fact makes one channel “better”. A B2B software company paying $30 on LinkedIn can be getting a bargain if one lead is worth thousands; an e-commerce brand paying $30 on Google Display would be burning money.
Worked Example: Is a $2.00 CPM Good?
Take the worked example from our cpm calculator guide: $500 bought 250,000 impressions, a CPM of (500 ÷ 250,000) × 1,000 = $2.00.
- On Google Display ($2–$5 range), $2.00 is a good CPM — at the low end of the range.
- On Facebook ($6–$14 range), $2.00 would be an exceptionally low CPM — suspiciously low, in fact, and worth checking that the impressions were real, viewable, and in your target geography.
- On LinkedIn ($25–$50+ range), $2.00 is not realistic — a LinkedIn campaign reporting $2.00 CPM has almost certainly got a reporting or targeting error.
Same number, three verdicts. Context is everything.
2026 CPM Benchmarks by Industry
Industry matters almost as much as platform, because customer lifetime value drives bidding. Industries where one customer is worth thousands bid aggressively; industries with thin margins cannot.
| Industry | Typical CPM range (2026) | Why |
|---|---|---|
| Finance & insurance | $15–$40 | One customer can be worth thousands |
| Legal services | $12–$35 | One client can be worth $10,000+ |
| B2B / SaaS | $10–$25 | Narrow targeting, high deal values |
| Healthcare | $12–$30 | Regulated, high-value patients |
| Education | $8–$18 | Seasonal spikes in Aug–Sep and Jan |
| E-commerce / retail | $5–$10 | Varies with product margin |
| Entertainment & gaming | $5–$10 | High volume, lower value per user |
| Publishing & media | $2–$5 | Low competition, high volume |
If you sell insurance and your CPM is $12, you are doing fine. If you sell phone cases and your CPM is $12, you are overpaying. The benchmark that matters is the one for your industry on your platform.
How to Judge Your Own CPM in 4 Steps
Step 1: Calculate your CPM correctly
Divide total cost by total impressions and multiply by 1,000. If you need the steps, our guide to how to calculate CPM works through three examples with exact numbers, starting with $500 for 250,000 impressions = $2.00 CPM.
Step 2: Compare with your own history
Look at the same campaign, same platform, over the last 90 days. A CPM that has risen 20% without a change in targeting or creative is a signal; a CPM that has fallen 20% after a creative refresh is a win. Your own trend line beats any published benchmark.
Step 3: Compare with your platform and industry range
Find your platform in the table above and your industry in the second table. If your CPM sits inside both ranges, it is normal. If it sits above both, something is wrong — usually targeting that is too narrow, creative that loses the auction, or seasonal demand.
Step 4: Check what the impressions bought
A $2.50 CPM with a 0.1% click-through rate buys almost nothing. A $7.50 CPM with a 2% click-through rate can be the better buy. Work it out: at $2.50 CPM and 0.1% CTR, 100,000 impressions cost $250 and produce 100 clicks — $2.50 per click. At $7.50 CPM and 2% CTR, 100,000 impressions cost $750 and produce 2,000 clicks — $0.38 per click. The “expensive” CPM was nearly seven times cheaper per click. CPM alone never tells the whole story.
Why Your CPM Might Be Higher Than the Benchmark
Narrow targeting
Targeting a 50,000-person audience costs more per thousand than targeting 5 million people. The auction has fewer impressions to sell and more advertisers chasing them. Broadening the audience is the fastest way to cut CPM — see our guide on how to lower your CPM.
Low creative quality
Ad platforms reward ads people engage with. A low relevance score or quality ranking means the platform charges you more for the same placement. Refreshing creative is often cheaper than raising the budget.
Seasonal demand
CPMs rise in Q4 on almost every platform as holiday budgets flood the auction — Meta CPMs for e-commerce can spike 40–60% from September through December. A November CPM that looks terrible may be perfectly normal for November.
High-value audience
If your customers are worth a lot — finance, legal, B2B software — your competitors know it too, and they bid accordingly. A high CPM in a high-value niche is the price of admission, not a failure.
Viewability and placement
Not all impressions are equal. A $2.00 CPM on below-the-fold display inventory can be worse value than a $7.50 CPM on a feed placement people actually see. Industry data consistently shows 30–40% of display impressions are never viewable. Check viewable CPM (vCPM) alongside CPM before judging.
What Is a Good CPM on Facebook?
On Facebook and Instagram, a good CPM for most consumer industries in 2026 sits in the $6–$15 range. E-commerce brands typically see $6–$14, education $8–$16, and finance $15–$30. A $7.50 CPM is a solid, normal result for a Facebook campaign — our worked example of $750 for 100,000 impressions is exactly $7.50, right in the middle of the range.
Below $5 on Facebook is unusually cheap and worth verifying: check that impressions are in your target countries and that the audience is not accidentally broad. Above $20 in a consumer industry is a warning sign — check targeting, creative fatigue, and whether you are bidding in the Q4 rush.
What Is a Good CPM on Google?
On Google Display, a good CPM is $2–$5. Google Search is a different world: because search ads are sold per click, not per thousand impressions, an estimated Search CPM of $20–$50 is normal — the intent is far higher, so advertisers pay far more per thousand views. On YouTube, $8–$15 is typical for standard video. Do not compare a Display CPM with a Search CPM; they are different products.
Frequently Asked Questions
What is a good CPM in 2026?
On Google Display, $2–$5; on Meta and TikTok, $5–$15; on YouTube, $8–$15; on LinkedIn, $25–$50+. Always compare against your own platform and industry, not a single universal number.
Is a $10 CPM good?
On Facebook or Instagram, $10 is normal. On Google Display, $10 is high. On LinkedIn, $10 is very cheap. The channel decides.
Is a lower CPM always better?
No. A low CPM with a near-zero click-through rate wastes money, while a higher CPM on a high-intent audience can produce far cheaper clicks and sales. Judge CPM together with click-through rate and cost per acquisition.
Why is my Facebook CPM so high?
The usual causes are narrow targeting, tired creative, Q4 seasonal demand, or a high-value audience with heavy competition. Broaden the audience, refresh the creative, and check whether the spike is seasonal before changing strategy.
What is the average CPM for display ads?
In 2026 planning ranges, Google Display averages around $2.50–$3.12 and programmatic display $1–$4. But averages hide huge variation by industry — finance display CPMs can run $5–$12 while publishing runs $2–$5.
How do I calculate my CPM?
Divide your total ad cost by total impressions, then multiply by 1,000. For example, $500 ÷ 250,000 × 1,000 = $2.00 CPM. Use our free cost per mille calculator to check any campaign in seconds.
